FIC Mitsubishi DSM Evo 8-9 Injector Set

  • $338.10


Mitsubishi DSM 1st and 2nd Gen or EVO 8/9 FIC's Data Matched high performance fuel injectors featuring high impedance bosch core, E85 compatible, with a lifetime warranty. Fuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.

Fuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid. Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability. Fuel Injector Clinic injectors are set up to include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly. Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.

All high impedance injectors EXCEPT 2150cc can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!

This set of injectors may require you to change the injector plug on the wiring harness of your car. This can be done by soldering in the pigtails (included with purchase) or repinning the factor connectors to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on the injectors to the plugs on your harness without any need for cutting or soldering. This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.

*Exact product may vary from picture shown, fuel injector body, top/bottom hat, and connector type may be different for your specific application*

IS126-0650H - Mitsubishi DSM/Evo Fuel Injector Clinic Injector Set: 4x650cc Saturated / High Impedance Ball & Seat Injectors. Requires pigtails PGTUSC4 or Plug & Play adaptors PADPUtoJ4. Resistor pack removal recommended.

IS126-0775H - Mitsubishi DSM/Evo Fuel Injector Clinic Injector Set: 4x775cc Saturated / High Impedance Ball & Seat Injectors. Requires pigtails PGTUSC4 or Plug & Play adaptors PADPUtoJ4. Resistor pack removal recommended.

IS126-1000H - Mitsubishi DSM/Evo 8/9 Fuel Injector Clinic Injector Set: 4x1000cc Saturated / High Impedance Ball & Seat Injectors. Includes pigtails PGTUSC4 or add Plug & Play adaptors PADPUtoJ4. Resistor pack removal recommended.

IS126-1200H - Mitsubishi DSM/Evo 8/9 Fuel Injector Clinic Injector Set: 4x1200cc Saturated / High Impedance Ball & Seat Injectors. Plug & Play fit to OEM harness. Resistor pack removal recommended.

IS126-1440H - Mitsubishi DSM/Evo 8/9 Fuel Injector Clinic Injector Set: 4x1440cc Saturated / High Impedance Ball & Seat Injectors. Includes PGTUSC4 or add Plug & Play adaptors PADPUtoJ4. Resistor pack removal recommended.

IS126-1650H - Mitsubishi DSM/Evo 8/9 Fuel Injector Clinic Injector Set: 4x1650cc Saturated / High Impedance Ball & Seat Injectors. Plug & Play fit to OEM harness. Resistor pack removal recommended.

IS126-2150H - Mitsubishi DSM/Evo Fuel Injector Clinic Injector Set: 4x2150cc Saturated / High Impedance Injectors. Includes pigtails PGT DEN4 or add Plug & Play adaptors PADPDtoJ4. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. Resistor pack removal recommended.