{"title":"Methanol","description":"","products":[{"product_id":"aem-water-methanol-injection-kit","title":"AEM Water Methanol Injection Kit","description":"\u003cp\u003e\u003cstrong\u003eTHE AEM WATER\/METHANOL INJECTION SYSTEM ADVANTAGE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWater\/methanol injection is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water\/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water\/methanol system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWater\/Methanol for all Levels of Gas Race Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAEM offers two different water\/methanol controller designs for gas vehicles:\u003c\/p\u003e\n\u003cp\u003eOne is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.\u003c\/p\u003e\n\u003cp\u003eThe second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM’s Water\/Methanol Injection Kit on ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based external MAP sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWater\/Methanol for Diesels of all Boost Levels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAEM Electronics offers two different water\/methanol controller designs for HD and Diesel trucks:\u003c\/p\u003e\n\u003cp\u003eOne is a Boost Dependent HD Controller and has an on-board MAP sensor (up to 40 PSI) with a molded in nipple for a boost hose pickup (PN 30-3301 with 5 gallon tank, PN 30-3303 tank-less).\u003c\/p\u003e\n\u003cp\u003eThe second HD controller features a multiple input design. The Multi-Input controller can be programmed to work with a 0-5v signal from an external MAP sensor for Diesels running over 40 PSI of boost, or with a frequency based Injector Duty Cycle (IDC) signal, frequency-based mass airflow (MAF), or 0-5v voltage-based MAF signal (PN 30-3351 with 5 gallon tank, PN 30-3352 tank-less).\u003c\/p\u003e\n\u003cp class=\"product-info model\"\u003e\u003cspan class=\"product-info-value\"\u003e\u003cstrong\u003eKIT CONTENTS BY PART NUMBER:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"product-info-value\"\u003e\u003cstrong\u003e30-3300\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e- \u003c\/span\u003e\u003cspan class=\"aemProductBrand\"\u003eAEM\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"aemProductTitle\"\u003eV2 Water\/Methanol Injection Kit, Standard Controller Internal MAP with 35psi max, 200psi WM Pump, 1 Gallon Reservoir, Conductive Fluid Level Sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"product-info model\"\u003e\u003cstrong\u003e\u003cspan class=\"product-info-value\"\u003e30-3301\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cspan class=\"aemProductBrand\"\u003eAEM\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eV2 Water\/Methanol Injection Kit, HD Controller Internal MAP with 40psi max, 200psi WM Pump, 5 Gallon Reservoir, Conductive Fluid Level Sensor\u003c\/p\u003e\n\u003cp class=\"product-info model\"\u003e\u003cspan class=\"product-info-value\"\u003e\u003cstrong\u003e30-3302\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e- \u003c\/span\u003e\u003cspan class=\"aemProductBrand\"\u003eAEM\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eV2 Water\/Methanol Nozzle and Controller Kit, Standard Controller Internal MAP with 35psi max, 200psi WM Pump, Jets, NO TANK INC.\u003c\/p\u003e\n\u003cdiv class=\"product-info model\"\u003e\n\u003cdiv class=\"product-info model\"\u003e\n\u003cstrong\u003e\u003cspan class=\"product-info-value\"\u003e30-3303\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"product-info-value\"\u003e - \u003c\/span\u003e\u003cspan class=\"product-info-value\"\u003e\u003cspan class=\"aemProductBrand\"\u003eAEM\u003c\/span\u003e \u003cspan class=\"aemProductTitle\"\u003eV2 Water\/Methanol Nozzle and Controller Kit, HD Controller Internal MAP with 40psi max, 200psi WM Pump, Jets, NO TANK INC.\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp class=\"product-info model\"\u003e\u003cstrong\u003e\u003cspan class=\"product-info-value\"\u003e30-3350\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cspan class=\"aemProductBrand\"\u003eAEM\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"aemProductTitle\"\u003eV2 Water\/Methanol Injection Kit, Multi Input Controller 0-5v\/MAF Frequency or Voltage\/Duty Cycle\/Ext MAP, 200psi WM Pump, 1 Gallon Reservoir, Conductive Fluid Level Sensor\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-info model\"\u003e\n\u003cdiv class=\"product-info model\"\u003e\n\u003cstrong\u003e\u003cspan class=\"product-info-value\"\u003e30-3351\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"product-info-value\"\u003e - \u003c\/span\u003e\u003cspan class=\"product-info-value\"\u003e\u003cspan class=\"aemProductBrand\"\u003eAEM\u003c\/span\u003e \u003cspan class=\"aemProductTitle\"\u003eV2 Water\/Methanol Injection Kit, Multi Input Controller 0-5v\/MAF Frequency or Voltage\/Duty Cycle\/Ext MAP, 200psi WM Pump, 5 Gallon Reservoir, Conductive Fluid Level Sensor\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp class=\"product-info model\"\u003e\u003cstrong\u003e\u003cspan class=\"product-info-value\"\u003e30-3352\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cspan class=\"aemProductBrand\"\u003eAEM\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eV2 Water\/Methanol Nozzle and Controller Kit\u003cspan\u003e - \u003c\/span\u003e\u003cspan class=\"aemProductDecription\"\u003e30-3352 - V2 Water\/Methanol Nozzle and Controller Kit, Multi-Input Controller - 0-5v\/MAF Frequency or Voltage\/Duty Cycle\/Ext MAP, 200psi WM Pump, NO TANK INC.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AEM","offers":[{"title":"30-3300","offer_id":32311509090364,"sku":"30-3300","price":579.95,"currency_code":"USD","in_stock":true},{"title":"30-3301","offer_id":32311509123132,"sku":"30-3301","price":699.95,"currency_code":"USD","in_stock":true},{"title":"30-3302","offer_id":32311509155900,"sku":"30-3302","price":511.95,"currency_code":"USD","in_stock":true},{"title":"30-3303","offer_id":32311509188668,"sku":"30-3303","price":614.95,"currency_code":"USD","in_stock":true},{"title":"30-3350","offer_id":32311509221436,"sku":"30-3350","price":562.95,"currency_code":"USD","in_stock":true},{"title":"30-3351","offer_id":32311509254204,"sku":"30-3351","price":699.95,"currency_code":"USD","in_stock":true},{"title":"30-3352","offer_id":32311509286972,"sku":"30-3352","price":511.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-3300.jpg?v=1593618958"},{"product_id":"spray-plate-for-b-d-f-h-j","title":"Spray Plate for B\/D\/F\/H\/J (Gen 2)","description":"\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eGEN 2 SPRAY PLATES WITH PROVISIONS FOR METHANOL AND NITROUS INJECTION ARE NOW AVAILABLE!\u003c\/h4\u003e\n\u003cp\u003e*68-70mm fits all throttle bodies up to 70mm*\u003c\/p\u003e\n\u003cp\u003e** 74-76mm fits all throttle bodies from 74 through 76mm**\u003c\/p\u003e\n\u003cp\u003eWe've redesigned the KS Tuned Spray plates to be slightly smaller and fit the contours of most intake and throttle setups more precisely! DBHFJ Gen 2 Spray Plates now feature provisions for single or dual nozzle methanol injection. No need for ugly fittings tapped in to your intercooler charge tubes, the Gen 2 Spray Plate allows methanol nozzles to be mounted cleanly out of sight. All plates will include plugs to seal the nozzle mounting holes if they are not used and methanol attachment kits are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease purchase your methanol attachment kit here: \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0e4bfa;\" data-mce-style=\"color: #0e4bfa;\"\u003e\u003ca title=\"Methanol Attachment Kit\" href=\"https:\/\/www.burton-racing.com\/products\/methanol-attachment-kit\" style=\"color: #0e4bfa; text-decoration: underline;\" data-mce-href=\"https:\/\/www.burton-racing.com\/products\/methanol-attachment-kit\" data-mce-style=\"color: #0e4bfa;\"\u003eKS Tuned Methanol Attachment Kit\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe KS tuned 68mm\/74mm spray throttle body plate fits the standard bolt pattern found on 88-00 Hondas and Acuras including the DBHFJ-series engines. 74mm is the largest size commonly found on aftermarket throttle bodies that still retain the IAC valve. Both plates include two stainless steel fittings that accept standard nitrous jets and will allow for a dual stage dry shot or single stage wet shot. Each fitting leads to no less than five injection ports inside the bore of the plate and each shot can be as large as you can find a jet for. *We tested for up to 200 HP per fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*We tested for up to 200 HP per fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eInstall Note:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eKS Tuned 68mm Plate is \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eREQUIRED\u003c\/span\u003e if you are using a stock intake manifold due to the IACV location\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003eVehicle Fitment Applications:\u003cbr\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eD-series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eB-series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eH-series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eF-series (Accord and S2000)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eJ-series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eSpray Plate Nitrous\/Fuel Jet Size Chart\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%;\" data-mce-style=\"width: 24.3328%;\"\u003e Target HP\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%;\" data-mce-style=\"width: 47.3825%;\"\u003eNitrous Jet\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%;\" data-mce-style=\"width: 23.9051%;\"\u003eFuel Jet\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%;\" data-mce-style=\"width: 24.3328%;\"\u003e55 HP\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%;\" data-mce-style=\"width: 47.3825%;\"\u003e32\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%;\" data-mce-style=\"width: 23.9051%;\"\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%;\" data-mce-style=\"width: 24.3328%;\"\u003e65 HP\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%;\" data-mce-style=\"width: 47.3825%;\"\u003e36\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%;\" data-mce-style=\"width: 23.9051%;\"\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%;\" data-mce-style=\"width: 24.3328%;\"\u003e75 HP\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%;\" data-mce-style=\"width: 47.3825%;\"\u003e40\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%;\" data-mce-style=\"width: 23.9051%;\"\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%;\" data-mce-style=\"width: 24.3328%;\"\u003e100 HP\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%;\" data-mce-style=\"width: 47.3825%;\"\u003e46\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%;\" data-mce-style=\"width: 23.9051%;\"\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/v2z-aARUVNQ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"KS Tuned","offers":[{"title":"68mm-70mm","offer_id":39793667539142,"sku":"KST-4000","price":159.0,"currency_code":"USD","in_stock":false},{"title":"74mm-76mm","offer_id":39793667571910,"sku":"KST-4004","price":159.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/KST-4000.png?v=1692122643"},{"product_id":"k-series-spray-plate-for-rbc-prb-intake-gen-2","title":"K Series Spray Plate for RBC\/PRB Intake (Gen 2)","description":"\u003ch4 style=\"text-align: center;\"\u003eGEN 2 SPRAY PLATES WITH PROVISIONS FOR METHANOL OR NITROUS INJECTION ARE NOW AVAILABLE!\u003c\/h4\u003e\n\u003cp\u003e**70-74mm fits all throttle bodies from 70 through 74mm**\u003c\/p\u003e\n\u003cp\u003eWe've redesigned the KS Tuned Spray plates to be slightly smaller and fit the contours of most intake and throttle setups more precisely! All Gen 2 K-Series Spray Plates now feature provisions for single nozzle methanol injection. No need for ugly fittings tapped in to your intercooler charge tubes, the Gen 2 Spray Plate allows the methanol nozzle to be mounted cleanly out of sight. All plates will include plugs to seal the nozzle mounting holes if they are not used and methanol attachment kits are sold separately.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003ePlease purchase your methanol attachment kit here: \u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca href=\"https:\/\/www.burton-racing.com\/products\/methanol-attachment-kit\" title=\"Methanol Attachment Kit\" style=\"color: #0e4bfa;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKS Tuned Methanol Attachment Kit\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe KS tuned PRB\/RBC Throttle Body Spray Plate fits both bolt patterns found on PRB and RBC K-series intake manifolds. The bore is 70mm and it works with DBW and cable throttle bodies. The plate includes two stainless steel fittings that accept all brands of standard nitrous jets and will allow for a dual stage dry shot or single stage wet shot. Each fitting leads to no less than five injection ports inside the bore of the plate and each shot can be as large as you can find a jet for.\u003c\/p\u003e\n\u003cp\u003e*We tested for up to 200 HP per fitting.\u003c\/p\u003e\n\u003ch4\u003eVehicle Fitment Applications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePRB\/PRC flanged intake manifolds:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSkunk2 Pro Series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e02-06 RSX Type-S (K20a2\/Z1)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e02-05 Civic SI (K20a3)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eJDM K20A Type R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e04-08 TSX (RBB)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e02+CRV, 03+Accord, 03+Element (RAA, similar to RBB but smaller plenum and only 60mm TB opening)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRBC\/RRC flanged intake manifolds:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e06+ USA Civic SI\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e06+ Civic Type R, FD2, K20A engine (RRC)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"KS Tuned","offers":[{"title":"Default Title","offer_id":39793676255430,"sku":"KST-4001","price":159.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/KST-4001.png?v=1692121391"},{"product_id":"spray-plate-90mm","title":"90mm Spray Plate (Gen 2)","description":"\u003cp\u003eThe Gen 2 Spray Plates are an improvement in every way over the first generation plates. First we got rid of the gaskets and added o-rings instead! And like all Gen 2 KS Tuned Spray Plates, we’ve added the option for methanol nozzles to be added using our meth attachments (our meth attachments are compatible with all meth controllers). And of course Wet or Dry Nitrous can used in up to two stages on the 90mm plate!\u003c\/p\u003e\n\u003cp\u003eThe Gen 2 90mm Spray Plate fits all intake manifolds and throttle bodies that use the common 90mm Mustang flange pattern such as the Skunk2 Ultra Intake manifold and most sheet metal intakes as well. The plate includes four stainless steel fittings that accept all brands of standard nitrous jets and will allow for dual stage wet shot or up to four stages dry. Each fitting leads to no less than five injection ports inside the bore of the plate and each shot can be as large as you can find a jet for.\u003c\/p\u003e\n\u003cp\u003e*We tested for up to 200 HP per fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVehicle Fitment Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e90mm Ford Mustang flange commonly found on aftermarket intake manifolds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSkunk2 Ultra Intake Manifolds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eK-tuned and Magnus aftermarket intake manifolds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFour ports allow for dual stage wet shot or up to four stages dry\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAccepts up to two meth attachments for use with pure methanol or water\/meth (sold separately)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBolts and o-rings included (No more gaskets!)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBillet aluminum plate, anodized black with stainless steel fittings\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003eSpray Plate Nitrous\/Fuel Jet Size Chart\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%; text-align: center;\" data-mce-style=\"width: 24.3328%;\"\u003e Target HP\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%; text-align: center;\" data-mce-style=\"width: 47.3825%;\"\u003eNitrous Jet\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%; text-align: center;\" data-mce-style=\"width: 23.9051%;\"\u003eFuel Jet\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%; text-align: center;\" data-mce-style=\"width: 24.3328%;\"\u003e55 HP\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%; text-align: center;\" data-mce-style=\"width: 47.3825%;\"\u003e32\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%; text-align: center;\" data-mce-style=\"width: 23.9051%;\"\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%; text-align: center;\" data-mce-style=\"width: 24.3328%;\"\u003e65 HP\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%; text-align: center;\" data-mce-style=\"width: 47.3825%;\"\u003e36\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%; text-align: center;\" data-mce-style=\"width: 23.9051%;\"\u003e19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%; text-align: center;\" data-mce-style=\"width: 24.3328%;\"\u003e75 HP\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%; text-align: center;\" data-mce-style=\"width: 47.3825%;\"\u003e40\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%; text-align: center;\" data-mce-style=\"width: 23.9051%;\"\u003e21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.3328%; text-align: center;\" data-mce-style=\"width: 24.3328%;\"\u003e100 HP\u003c\/td\u003e\n\u003ctd style=\"width: 47.3825%; text-align: center;\" data-mce-style=\"width: 47.3825%;\"\u003e46\u003c\/td\u003e\n\u003ctd style=\"width: 23.9051%; text-align: center;\" data-mce-style=\"width: 23.9051%;\"\u003e26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"KS Tuned","offers":[{"title":"Default Title","offer_id":39793678287046,"sku":"KST-4003","price":159.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/KST-4003.png?v=1692113037"},{"product_id":"aem-water-methanol-injection-solenoid","title":"AEM Water Methanol Injection Solenoid","description":"\u003cp\u003eAEM’s stainless steel Water\/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water\/methanol flow into the inlet when the WMI system is not engaged. This affordable water\/methanol injection accessory features high flow capability (3,600cc\/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay.\u003c\/p\u003e\n\u003cp\u003eThe valve body features include 1\/8” NPT ports with included push-to-lock ¼” hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It’s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water\/methanol injection system you are using!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp\u003eHigh flow rating (3600 cc\/min @ 150 psi)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp\u003eLow current draw (0.75A @ 13.5V)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp\u003eNo additional relay required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp\u003eStandard 1\/8”- 27 NPT inlet\/outlet with included ¼” push-to-lock hose fittings for easy installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp\u003eFast response time\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp\u003eTested to 200 PSI\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp\u003eStainless steel enclosure and internals with EPDM seals for corrosion resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp\u003eFlying leads simplify connection with user desired connector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":39841588510918,"sku":"30-3326","price":127.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-3326.jpg?v=1621106364"},{"product_id":"aem-water-methanol-injection-filter","title":"AEM Water Methanol Injection Filter","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAEM’s Methanol\/Water Injection Filter can filter particulates as small as 40 microns. It protects the working parts of the water\/methanol system and the engine from particulates in the water\/methanol mixture when installed in-line before the water\/methanol pump, and can be used on virtually any water\/methanol injection system using ¼” OD tubing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-info model\"\u003e\n\u003cdiv class=\"product-info model\"\u003e\n\u003cdiv class=\"product-info model\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":39841646543046,"sku":"30-3003","price":51.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-3003.jpg?v=1621106499"},{"product_id":"water-methanol-injection-nozzle","title":"Water\/Methanol Injection Nozzle","description":"\u003cp\u003eThese nozzles are compatible with any blend of water\/methanol up to 100% methanol. They thread directly in to our Gen 2 Spray Plates. Nozzles can be combined to deliver from 5 GPH all the way up to 30 GPH when used in a dual nozzle configuration in our Gen 2 Spray Plate.\u003c\/p\u003e\n\u003cp\u003eUse in combination with the Methanol Attachment Kit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e5 GPH is the recommended minimum up to 300 hp\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10 GPH is the recommended minimum for 300-500 hp\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e15 GPH is the recommended minimum for 500+ hp\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KS Tuned","offers":[{"title":"5 GPH (315cc\/min) @ 100psi Nozzle","offer_id":46405866750251,"sku":"KST-4505","price":25.0,"currency_code":"USD","in_stock":false},{"title":"10 GPH (631cc\/min) @ 100PSI Nozzle","offer_id":46405866783019,"sku":"KST-4506","price":25.0,"currency_code":"USD","in_stock":true},{"title":"15 GPH (946cc\/min) @ 100PSI Nozzle","offer_id":46405866815787,"sku":"KST-4507","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/MW15.png?v=1692108920"},{"product_id":"methanol-attachment-kit","title":"Methanol Attachment Kit","description":"\u003cp\u003e\u003cspan\u003eEach kit includes a fully anodized methanol manifold, an adapter fitting to connect to a -4 AN methanol feed line and stainless hardware to attach the manifold to our Gen 2 Spray Plate. The fitting can be installed on either side of the manifold to allow easy connections even in tight engine bays. One attachment kit is required per nozzle, dual nozzle configurations will require two attachment kits. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePREMIUM QUALITY BRASS WATER\/METHANOL INJECTION NOZZLES, PLEASE SELECT YOUR SIZE.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese nozzles are compatible with any blend of water\/methanol up to 100% methanol. They thread directly in to our Gen 2 Spray Plates. Nozzles can be combined to deliver from 5 GPH all the way up to 30 GPH when used in a dual nozzle configuration in our Gen 2 Spray Plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e5 GPH is the recommended minimum up to 300 hp\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10 GPH is the recommended minimum for 300-500 hp\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e15 GPH is the recommended minimum for 500+ hp\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KS Tuned","offers":[{"title":"No Nozzle","offer_id":46406652559659,"sku":"KST-4500","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Yes - 5 GPH (315cc\/min) @ 100psi Nozzle","offer_id":46406235783467,"sku":"KST-4500-4505","price":55.0,"currency_code":"USD","in_stock":false},{"title":"Yes - 10 GPH (631cc\/min) @ 100PSI Nozzle","offer_id":46406235816235,"sku":"KST-4500-4506","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Yes - 15 GPH (946cc\/min) @ 100PSI Nozzle","offer_id":46406235849003,"sku":"KST-4500-4507","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/KS-TUNED-METHANOL-KIT.png?v=1692111277"},{"product_id":"aem-v3-water-methanol-injector-and-swirl-generator-kit","title":"AEM V3 Water Methanol Injector \u0026 Swirl Generator Kit","description":"\u003cp\u003eReplacement V3 Water\/Methanol Injectors (Qty 2)\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003e\n\u003cp\u003eIncludes Interchangeable Swirl Generators for 250cc, 500cc, \u0026amp; 1000cc of flow for each injector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46659500572971,"sku":"30-3313","price":110.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-3313-wmi-nozzle-kit.jpg?v=1692999285"},{"product_id":"wm-installation-kit","title":"Holley EFI Water Methanol Installation Kit","description":"\u003cp\u003eTake your forced induction ride to the next level with a Holley water\/methanol injection system. Integrated into the Holley Dominator and HP EFI systems is the capability to control water\/methanol injection, allowing you to safely run on lower octane pump gas. What makes our system unique and light years ahead of competitive systems is that the solenoid flow has been characterized within the ECU. Program in an exact flow amount into the software and that flow is injected into the engine. This is critical to ensure that neither too little (causing engine damage), nor too much (causing a large loss in power) water\/methanol mix is injected into the engine. Select the exact percentage of water\/methanol mix to be delivered vs. the percentage of fuel flow present, at any RPM and load. This makes tuning a very simple and accurate process. All components are designed to be compatible with water\/methanol mix of up to 50% methanol.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eReservoir measures 6 in. Wide x 4 in. Deep x 5 in. Tall\u003c\/li\u003e\n\u003cli\u003eUsed with Dominator and HP EFI systems\u003c\/li\u003e\n\u003cli\u003eDesigned for 100% water and up to a 50\/50 percent mixture of water and methanol\u003c\/li\u003e\n\u003cli\u003eIncludes reservoir, low level float, 1\/4\" ID, 1\/2\" OD 6ft. tubing, polyurethane 1\/4\" OD 16 ft. tubing, filter, nylon 3\/8\" NPT-1\/4\" ID tube fitting, relay, stainless 3\/8\" NPT-1\/4\" OD tube fitting, relay wiring and fuse, and warning LED\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holley EFI","offers":[{"title":"Default Title","offer_id":52732617359659,"sku":"557-101","price":331.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/1_9423bed9-21f7-4ffe-8c4b-45fc5342ad8c.png?v=1773853449"},{"product_id":"1000cc-wm-solenoid","title":"Holley EFI Solenoid\/Nozzle 1000cc\/min (800HP)","description":"\u003cp\u003eTake your forced induction ride to the next level with a Holley water\/meth injection system! Integrated into the Holley HP and Dominator EFI Systems is the capability to control water\/methanol injection, allowing you to safely run on lower octane pump gas!\u003c\/p\u003e\n\u003cp\u003eWhat makes the Holley water\/methanol system unique and light years ahead of competitive systems, is that the solenoid flow has been characterized within the ECU. Program in an exact flow amount into the software, and that flow is injected into the engine. This is critical to ensure that neither too little (causing engine damage), nor too much (causing a large loss in power) water\/methanol mix is injected into the engine. Select the exact percentage of water\/methanol mix to be delivered vs. the percentage of fuel flow present, at any RPM and load. This makes tuning a very simple and accurate process.\u003c\/p\u003e\n\u003cp\u003eAll components are designed to be compatible with water\/methanol mix of up to 50% methanol. The Water\/Meth solenoids are run by an injector driver output. If an extra output is not available (as would be the case on a HP ECU driving 8 injectors), PN 554-115 can be purchased that can be driven by a low side PWM output.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eReplacement\/Service part\u003c\/li\u003e\n\u003cli\u003e1000cc\/min\u003c\/li\u003e\n\u003cli\u003eFor 800 HP engines\u003c\/li\u003e\n\u003cli\u003eIncludes bung\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holley EFI","offers":[{"title":"Default Title","offer_id":52732617425195,"sku":"557-106","price":518.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/557-106.png?v=1773853625"}],"url":"https:\/\/www.burton-racing.com\/collections\/methanol\/holley-efi.oembed","provider":"Burton-Racing","version":"1.0","type":"link"}