{"title":"Gauges","description":"Almost nothing helps keep an engine alive better than an accurate gauge and an alert eye to help monitor real time conditions. We offer some of the best gauge options on the market with fast response and easy readability that make these a must have for any enthusiast.","products":[{"product_id":"cd-5-carbon-digital-racing-dash-display","title":"AEM CD-5 Carbon Digital Racing Dash Display","description":"\u003cp\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003cbr\u003eCD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVIEW AND LOG DATA FROM OVER 250 CAN DEVICES!\u003c\/strong\u003e\u003cbr\u003eThe CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and\/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/products\/cd-digital-dash-displays-adapter-harnesses\/CD-5-Carbon-Digital-Racing-Dash-Displays#4\" class=\"changetab\"\u003e\u003cspan\u003e(see Supported Apps Tab)\u003c\/span\u003e\u003c\/a\u003e, and the CD-5 Carbon can be added to any vehicle with the addition of our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/?q=products\/30-2212-22-channel-can-sensor-module\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003e22 Channel CAN Sensor Module.\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eThe CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.\u003c\/p\u003e\n\u003cp\u003eThird-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/products\/cd-7-power-cable-non-aemnet-devices\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eCD Dash Power Cable\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto simplify the installation of 3rd party devices. We have also developed 3rd Party Plug \u0026amp; Play Adapter Cables for certain applications, which are highlighted on our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/products\/cd-digital-dash-displays-adapter-harnesses\/CD-5-Carbon-Digital-Racing-Dash-Displays#4\" class=\"changetab\"\u003e\u003cspan\u003eSupported Apps Tab\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand can be viewed on our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/products\/cd-digital-dash-displays-adapter-harnesses\/CD-5-Carbon-Digital-Racing-Dash-Displays#5\" class=\"changetab\"\u003e\u003cspan\u003eInstall Kits Tab\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFour packages are available:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePN 30-5600, CD-5 Carbon Non-Logging\/Non GPS Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5601, CD-5L Carbon Logging Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5602, CD-5G Carbon Non-Logging Display with Internal GPS\u003c\/li\u003e\n\u003cli\u003ePN 30-5603, CD-5LG Carbon Logging Display with Internal GPS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"CD-5 (30-5600)","offer_id":32307629260860,"sku":"30-5600","price":1177.95,"currency_code":"USD","in_stock":true},{"title":"CD-5L (30-5601)","offer_id":32307629293628,"sku":"30-5601","price":1199.95,"currency_code":"USD","in_stock":true},{"title":"CD-5G (30-5602)","offer_id":32307629326396,"sku":"30-5602","price":1349.95,"currency_code":"USD","in_stock":true},{"title":"CD-5LG (30-5603)","offer_id":32307629359164,"sku":"30-5603","price":1649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-5600_50.jpg?v=1621706588"},{"product_id":"cd-5-carbon-flat-panel-digital-dash-display","title":"AEM CD-5 Carbon Flat Panel Digital Dash Display","description":"\u003cp\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003cbr\u003eCD-5 Carbon Flat Panel Digital Dash Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon Dashes, but do not have buttons or an LED shade hood built into the enclosure.\u003c\/p\u003e\n\u003cp\u003eCD-5 Carbon Flat Panel Digital Dash Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.\u003c\/p\u003e\n\u003cp\u003eFour CD Carbon Flat Panel packages are available:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePN 30-5600F, CD-5F Carbon Flat Panel Non-Logging\/ Non-GPS Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5601F, CD-5FL Carbon Flat Panel Logging Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5602F, CD-5FG Carbon Flat Panel Non-Logging Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5603F, CD-5FLG Carbon Flat Panel Logging Display with Internal GPS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"CD-5 Flat Panel (30-5600F)","offer_id":32307675791420,"sku":"30-5600F","price":1126.95,"currency_code":"USD","in_stock":true},{"title":"CD-5L Flat Panel (30-5601F)","offer_id":32307675824188,"sku":"30-5601F","price":1499.95,"currency_code":"USD","in_stock":true},{"title":"CD-5G Flat Panel (30-5602F)","offer_id":32307675856956,"sku":"30-5602F","price":1299.95,"currency_code":"USD","in_stock":true},{"title":"CD-5LG Flat Panel (30-5603F)","offer_id":32307675889724,"sku":"30-5603F","price":1599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-5600F_50.jpg?v=1593467402"},{"product_id":"cd-7-carbon-digital-racing-dash-displays","title":"AEM CD-7 Carbon Digital Racing Dash Displays","description":"\u003cp\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003cbr\u003eCD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVIEW AND LOG DATA FROM OVER 250 CAN DEVICES!\u003c\/strong\u003e\u003cbr\u003eThe CD-7 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and\/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/products\/cd-digital-dash-displays-adapter-harnesses\/cd-7-super-bright-sunlight-readable-full-color-dash-displays#4\" class=\"changetab\"\u003e\u003cspan\u003e(see Supported Apps Tab)\u003c\/span\u003e\u003c\/a\u003e, and the CD-7 Carbon can be added to any vehicle with the addition of our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/?q=products\/30-2212-22-channel-can-sensor-module\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003e22 Channel CAN Sensor Module.\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eThe CD-7 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.\u003c\/p\u003e\n\u003cp\u003eThird-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/products\/cd-7-power-cable-non-aemnet-devices\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eCD Dash Power Cable\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto simplify the installation of 3rd party devices. We have also developed 3rd Party Plug \u0026amp; Play Adapter Cables for certain applications, which are highlighted on our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/products\/cd-digital-dash-displays-adapter-harnesses\/cd-7-super-bright-sunlight-readable-full-color-dash-displays#4\" class=\"changetab\"\u003e\u003cspan\u003eSupported Apps Tab\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand can be viewed on our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.aemelectronics.com\/products\/cd-digital-dash-displays-adapter-harnesses\/cd-7-super-bright-sunlight-readable-full-color-dash-displays#5\" class=\"changetab\"\u003e\u003cspan\u003eInstall Kits Tab\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFour packages are available:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePN 30-5700, CD-7 Carbon Non-Logging\/ Non-GPS Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5701, CD-7L Carbon Logging Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5702, CD-7G Carbon Non-Logging Display with Internal GPS\u003c\/li\u003e\n\u003cli\u003ePN 30-5703, CD-7LG Carbon Logging Display with Internal GPS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"CD-7 (30-5700)","offer_id":32307685031996,"sku":"30-5700","price":1699.95,"currency_code":"USD","in_stock":true},{"title":"CD-7L (30-5701)","offer_id":32307685064764,"sku":"30-5701","price":2049.95,"currency_code":"USD","in_stock":true},{"title":"CD-7G (30-5702)","offer_id":32307685097532,"sku":"30-5702","price":1849.95,"currency_code":"USD","in_stock":true},{"title":"CD-7LG (30-5703)","offer_id":32307685130300,"sku":"30-5703","price":2151.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-5700_50.jpg?v=1593467708"},{"product_id":"cd-7-carbon-flat-panel-digital-dash-display","title":"CD-7 Carbon Flat Panel Digital Dash Display","description":"\u003cp\u003eCD-7 Carbon Flat Panel Digital Dash Displays have a compact enclosure that makes them perfect for flush mount installation or in-dash installations with tight tolerances. They include all of the robust features found in the original CD-7 Carbon Dash, but do not have buttons or an LED shade hood built into the enclosure.\u003c\/p\u003e\n\u003cp\u003eCD-7 Carbon Flat Panel Digital Dash Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.\u003c\/p\u003e\n\u003cp\u003eFour CD Carbon Flat Panel packages are available:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePN 30-5700F, CD-7F Carbon Flat Panel Non-Logging\/ Non-GPS Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5701F, CD-7FL Carbon Flat Panel Logging Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5702F, CD-7FG Carbon Flat Panel Non-Logging Display\u003c\/li\u003e\n\u003cli\u003ePN 30-5703F, CD-7FLG Carbon Flat Panel Logging Display with Internal GPS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"CD-7 Flat Panel (30-5700F)","offer_id":32307706232892,"sku":"30-5700F","price":1649.95,"currency_code":"USD","in_stock":true},{"title":"CD-7L Flat Panel (30-5701F)","offer_id":32307706265660,"sku":"30-5701F","price":1999.95,"currency_code":"USD","in_stock":true},{"title":"CD-7G Flat Panel (30-5702F)","offer_id":32307706298428,"sku":"30-5702F","price":1749.95,"currency_code":"USD","in_stock":true},{"title":"CD-7LG Flat Panel (30-5703F)","offer_id":32307706331196,"sku":"30-5703F","price":2099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-5700F_50.jpg?v=1593468231"},{"product_id":"aem-wideband-afr-gauge-x-series","title":"AEM Wideband AFR Gauge X-Series","description":"\u003cp\u003eAEM’s X-Series Wideband UEGO Air\/Fuel Ratio Sensor Controller Gauges are built upon unique, patented 100% Digital technology (Patent 9,575,030) that makes them the fastest responding wideband air\/fuel ratio controllers in independent testing*.\u003c\/p\u003e\n\u003cp\u003eThe X-Series Wideband UEGO AFR Sensor Controller Gauge (PN 30-0300) measures 2 1\/16th-inch (52mm) in diameter and features a modern, visually striking faceplate and new seven-segment center display that is 87% larger than the 30-4110 AEM Wideband Gauge’s center display. This creates the perception of a larger overall gauge, but in a common 52mm size for easy mounting. Its slim depth (less than one inch overall) and ultra-slim cup depth of .200-inches dramatically increases its application base and potential mounting locations.\u003c\/p\u003e\n\u003cp\u003eThe X-Series Wideband UEGO AFR Gauge has a user configurable display via buttons on the gauge face that allows you to change AFR values for different fuels, Lambda or O2%, change the center display to three or four digits, perform a free-air calibration if desired as the sensor ages, and change the CAN message ID when linking multiple X-Series Inline Controllers or X-Series Controller Gauges. A black bezel and black dual-faced faceplate for air\/fuel and Lambda are included, and an optional silver bezel with white dual-faced air\/fuel and Lambda faceplate is available (PN 30-0300-ACC, sold separately). An Auto Dimming feature is included. Locking connectors ensure a positive connection between the harnesses and gauge and a new single board design adds to the new gauge’s durability.\u003c\/p\u003e\n\u003cp\u003eThe gauge includes a 0-5v and RS232 Serial Port output for feedback control and data logging, and an AEMnet (CANbus) output for data logging. AEMnet allows additional X-Series Wideband Controllers to be daisy chained together (up to 16 cylinders) for recording AFR in multiple cylinders. It supports vehicle\/system voltages up to 16V, and can be used on EFI or carbureted applications, and dynamometers in applications using gasoline, methanol, ethanol, Diesel, propane, and CNG.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eX-DIGITAL TECHNOLOGY\u003c\/strong\u003e\u003cbr\u003eX-Digital wideband technology gives these controllers the ability to read and report values that other controllers do not, which can deliver more optimized engine tuning and a safer overall operating condition. The controller’s high-speed digital implementation ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHY RESPONSE TIME MATTERS\u003c\/strong\u003e\u003cbr\u003eFaster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning. Deadtime is the delay between when exhaust gas composition changes and when that change is reported by the O2 sensor. While flow of exhaust gases (transport delay) can affect deadtime, it is not the only source. Often, the sensing elements response to the gas is the largest contributor to deadtime when an engine is in high RPM under load.\u003c\/p\u003e\n\u003cp\u003eWhen tuning an engine using wideband AFR feedback control on an inertia dyno, deadtime affects the data you are looking at because it is reported in a different operating location than when it actually occurred.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eThis means with long deadtimes, whatever changes you make to the base fueling will likely be in the wrong location.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis can be particularly dangerous to high compression and high-boost forced induction vehicles, and EFI systems that use feedback control to auto-tune.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReducing deadtime improves wideband feedback control, and can provide a safer, more powerful and accurate tune.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAEM’s Wideband Controllers with X-Series digital technology can reduce deadtime and improve the performance of your vehicle through more accurate AFR tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFACTORY CALIBRATION RESISTOR OR FREE-AIR CAL, IT’S YOUR CHOICE!\u003c\/strong\u003e\u003cbr\u003eThe X-Series Wideband Gauge and X-Series Inline Controller support the popular Bosch 4.9LSU sensor and can utilize both the factory calibration resistor and free-air calibration methods**. This allows users to take advantage of the precise factory resistor calibration when a sensor is new but then allows for free-air calibrations if the user desires when the sensor ages. It’s the perfect marriage of simplicity and accuracy!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT IS A WIDEBAND UEGO AIR\/FUEL CONTROLLER?\u003c\/strong\u003e\u003cbr\u003eAEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost-effective tuning tools that allow users to accurately monitor the Air\/Fuel Ratio (AFR) of their engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHY USE A WIDEBAND AIR\/FUEL CONTROLLER?\u003c\/strong\u003e\u003cbr\u003eAccurate AFR data is critical when tuning an engine. Running rich (very low air\/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air\/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air\/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air\/fuel controllers that can help ensure your vehicle is optimally tuned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?\u003c\/strong\u003e\u003cbr\u003eNo. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309623095356,"sku":"30-0300","price":222.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0300_50.jpg?v=1593556663"},{"product_id":"aem-wideband-afr-gauge-obdii-x-series","title":"AEM Wideband AFR Gauge OBDII X-Series","description":"\u003cp\u003eAEM's X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334) provides tuners who are using piggyback tuning modules or open source software with the ability to view AFR through the factory CAN-bus stream that is output by the factory ECU, and deliver the most accurate, safe and powerful tune.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan color=\"red\" style=\"color: red;\"\u003eThe 30-0334 X-Series OBDII Wideband Gauge is validated to work with EFILive, HPTuners and DashDaq software.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe X-Series Wideband AFR OBDII Gauge includes an OBDII pass-through connector and Bosch 4.9LSU sensor that can be free-air calibrated or used with the factory resistor calibration. Additional wiring for a 0-5v or RS232 Serial output can be added by the user for outputting to a data logger. This OBDII pass-through capability replaces the traditional AEMnet stream available in the 30-0300 X-Series Wideband AFR Gauge Controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOBDII CAN-bus OUTPUT\u003c\/strong\u003e\u003cbr\u003eThe OBDII output simulates an auxiliary ECU signal when plugged into a vehicle’s OBD port, which requires a unique address from the other ECUs already on a vehicle’s network. AEM’s default OBDII CAN address will work with most popular vehicles and adjustments should not be necessary. However, AEM has provided OBDII address programmability through the buttons on the gauge face if a different address other than the default address is required, allowing users to program ECU #, Parameter Identification (PID), Message Identifier, and Bit Rate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePATENTED X-DIGITAL TECHNOLOGY – It’s The Fastest\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eX-Series Widebands are the fastest responding wideband air\/fuel ratio controllers in independent testing against 17 other wideband UEGO air\/fuel controllers.*\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe controller’s high speed, patented, X-Digital technology (Patent 9,575,030) ensures no loss of signal fidelity and full transient response, making it able to identify the slightest fluctuations in AFR and output them in full value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHY RESPONSE TIME MATTERS\u003c\/strong\u003e\u003cbr\u003eFaster response time improves wideband feedback control, and can provide a safer, more powerful and accurate tune. AEM’s Wideband Controllers with X-Digital technology reduce deadtime and can improve the performance of your vehicle through more accurate AFR tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFACTORY CALIBRATION RESISTOR OR FREE-AIR CAL, IT’S YOUR CHOICE!\u003c\/strong\u003e\u003cbr\u003eX-Series Wideband Gauges and the X-Series Inline Controller support the popular Bosch 4.9LSU sensor, and can utilize both the factory calibration resistor and free-air calibration methods. This allows users to take advantage of the precise factory resistor calibration when a sensor is new but then allows for free-air calibrations if the user desires when the sensor ages.** It’s the perfect marriage of simplicity and accuracy!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT IS A WIDEBAND UEGO AIR\/FUEL CONTROLLER?\u003c\/strong\u003e\u003cbr\u003eAEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air\/Fuel Ratio (AFR) of their engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHY USE A WIDEBAND AIR\/FUEL CONTROLLER?\u003c\/strong\u003e\u003cbr\u003eAccurate AFR data is critical when tuning an engine. Running rich (very low air\/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air\/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air\/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air\/fuel controllers that can help ensure your vehicle is optimally tuned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?\u003c\/strong\u003e\u003cbr\u003eNo. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.\u003c\/p\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309639151676,"sku":"30-0334","price":286.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0334.jpg?v=1593556848"},{"product_id":"aem-oil-fuel-pressure-gauge-x-series","title":"AEM 100psi Oil\/Fuel Pressure Gauge X-Series","description":"\u003cp\u003e\u003cspan\u003eAEM’s 30-0301 X-Series 100 PSI\/7 BAR Digital Oil\/Fuel Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eUser selectable standard or metric display (0-100 PSI\/0-7 BAR)\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel and faceplate accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309691285564,"sku":"30-0301","price":222.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0301_50.jpg?v=1593560047"},{"product_id":"aem-temperature-gauge-x-series","title":"AEM Temperature Gauge X-Series","description":"\u003cp\u003e\u003cspan\u003eAEM’s 30-0302 X-Series 100-300 F\/40-150C Digital Gauge combine incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate water, transmission and\/or oil or temperature readouts in their high performance vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eUser selectable standard or metric display (100-300 F\/40-150 C)\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel and faceplate accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309693218876,"sku":"30-0302","price":232.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0302_50.jpg?v=1593560324"},{"product_id":"aem-volt-gauge-x-series","title":"AEM Volt Gauge X-Series","description":"\u003cp\u003e\u003cspan\u003eAEM’s 30-0303 X-Series Digital Voltmeter gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly a accurate voltage readout in their high performance vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to system voltage\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel with white faceplate accessory kit available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309695053884,"sku":"30-0303","price":161.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0303_50.jpg?v=1593560394"},{"product_id":"aem-egt-gauge-x-series","title":"AEM EGT Gauge X-Series","description":"\u003cp\u003e\u003cspan\u003eAEM’s 30-0305 X-Series 0-1800F\/0-1000C Digital Exhaust Gas Temperature (EGT) gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want a highly accurate EGT readout in their high performance vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable 3- or 4-digit center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings (excl. Volts)\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel with white faceplate(s) accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309697347644,"sku":"30-0305","price":334.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0305_50.jpg?v=1593560620"},{"product_id":"aem-35psi-boost-gauge-x-series","title":"AEM 35psi Boost Gauge X-Series","description":"\u003cp\u003e\u003cspan\u003eAEM’s 30-0306 X-Series -30in\/Hg~35PSI \/ -1~2.5BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 35 PSI or 2.5 BAR in their high performance vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eUser selectable standard or metric display ( -30in\/Hg~35PSI \/ -1~2.5BAR)\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel and white faceplate accessory kit available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309699215420,"sku":"30-0306","price":222.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0306_50.jpg?v=1593561241"},{"product_id":"aem-60psi-boost-gauge-x-series","title":"AEM 60psi Boost Gauge X-Series","description":"\u003cp\u003e\u003cspan\u003eAEM’s 30-0308 X-Series -30in\/Hg~60PSI \/ -1~4BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 60 PSI or 4 BAR in their high performance vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eUser selectable standard or metric display ( -30in\/Hg~60PSI \/ -1~4BAR)\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings (excl. Volts)\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel with white faceplate(s) accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309701804092,"sku":"30-0308","price":315.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0308_50.jpg?v=1593561295"},{"product_id":"aem-150psi-oil-pressure-gauge-x-series","title":"AEM 150psi Oil Pressure Gauge X-Series","description":"\u003cp\u003e\u003cspan\u003eAEM’s 30-0307 X-Series 150 PSI\/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eProgrammable center LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eUser selectable standard or metric display (0-150 PSI\/0-10 BAR)\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings (excl. Volts)\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel with white faceplate(s) accessory kits available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309702950972,"sku":"30-0307","price":266.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0307_50.jpg?v=1593561536"},{"product_id":"aem-15psi-boost-gauge-x-series","title":"AEM 15psi Boost Gauge X-Series","description":"\u003cp\u003e\u003cspan\u003eAEM’s 30-0309 X-Series 0~15PSI Digital Boost\/Fuel Pressure Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost or fuel pressure readouts up to 15 PSI in their high performance supercharged or carbureted vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO READ\u003c\/strong\u003e\u003cbr\u003eVisual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASIER TO MOUNT\u003c\/strong\u003e\u003cbr\u003eDespite the larger display, X-Series Gauges are contained in a standard 2-1\/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMARTER INTERFACE\u003c\/strong\u003e\u003cbr\u003eX-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak\/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003eCenter LED is 87% larger than original AEM gauges\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003ePeak\/Recall via gauge face buttons\u003c\/li\u003e\n\u003cli\u003eUser selectable threshold warnings\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel with white faceplate accessory kit available (sold separately)\u003c\/li\u003e\n\u003cli\u003eAEMnet CANbus-enabled for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003e0-5v analog outputs for transmitting data to EMS or Data Logger\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors provide secure connection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309705310268,"sku":"30-0309","price":243.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0309_50.jpg?v=1593561700"},{"product_id":"aem-obd2-digital-datastream-gauge-x-series","title":"AEM OBD2 Digital Datastream Gauge X-Series","description":"\u003cp\u003eAEM’s X-Series OBDII gauge (PN 30-0311) puts multiple channels of data at your fingertips by reading the CAN bus stream of your vehicle’s OBD port and transmitting those channels to the gauge display. It reads Diagnostic Trouble Codes (DTCs) and gives you the ability to clear codes. Wiring is as simple as connecting the gauge to your vehicle’s OBDII port using the supplied connector! Because the X-Series OBDII gauge reads OBDII parameters transmitted through a vehicle’s CAN datastream, it will only work on 2008+ model year vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEASY TO USE\u003c\/strong\u003e\u003cbr\u003eUse the ‘Page’ button on the gauge face to scroll through available channels of data transmitted through the OBD port. Possible channels are listed below and may include IAT, EGT, RPM, Ethanol %, MAF, Fuel Pressure, Manifold Pressure, Boost Pressure, TPS, Vehicle Speed, Lambda and more (channel availability is ultimately dependent upon what channels are programmed to transmit by the vehicle manufacturer).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAD \u0026amp; CLEAR TROUBLE CODES\u003c\/strong\u003e\u003cbr\u003eThe ‘DTC’ button tells the gauge to scan for trouble codes and will report any stored DTCs, allowing you to look them up and determine the course of repair. This button also allows users to cleat DTCs once the problem is resolved.\u003cbr\u003eThe X-Series OBDII Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003eX-SERIES DIGITAL OBDII GAUGE FEATURES:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReads data channels from 2008+ MY vehicles through the OBDII port!\u003c\/li\u003e\n\u003cli\u003eReads and clears Diagnostic Trouble Codes (DTCs)!\u003c\/li\u003e\n\u003cli\u003eEasy to install and wire –power and data come from OBDII port using supplied connector\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003ePositive locking connector provides secure connection\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eBlack bezel and black faceplate included (silver bezel\/white faceplate sold separately, PN 30-0311-ACC)\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicle\/system voltages up to 16V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309709897788,"sku":"30-0311","price":181.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0311_50.jpg?v=1593562057"},{"product_id":"aemnet-can-bus-gauge-x-series","title":"AEMNet CAN bus Gauge X-Series","description":"\u003cp\u003eThe AEMnet CAN bus gauge connects to AEMnet-equipped devices through a 4-pin DTM connector and displays data in either US or Metric units. View multiple data channels from an Infinity ECU, Series 2 or EMS-4 standalone, view AFR or Lambda from X-Series Wideband Controllers or 4-Channel Wideband Controllers, or view vehicle speed and acceleration from a Vehicle Dynamics Module (see available Channels List). Users can program which available channels they want to see on the display, choose between displaying Lambda or AFR and clear peak values for channels by using the buttons on the faceplate.\u003c\/p\u003e\n\u003cp\u003eThe X-Series AEMnet CAN bus Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003eX-SERIES DIGITAL AEMNET CAN bus GAUGE FEATURES:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReads data channels from AEMnet CAN bus-equipped devices!\u003c\/li\u003e\n\u003cli\u003eChoose which available channels you want to see using buttons on the faceplate\u003c\/li\u003e\n\u003cli\u003eUser selectable units of measurement (US or Metric)\u003c\/li\u003e\n\u003cli\u003eUser selectable wideband measurements (AFR or Lambda)\u003c\/li\u003e\n\u003cli\u003eClear peak values for channels using buttons on the faceplate\u003c\/li\u003e\n\u003cli\u003eAuto-hides channels that aren’t present on the data stream\u003c\/li\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel with white faceplate accessory kit available (sold separately, PN 20-0312-ACC)\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connector provides secure connection\u003c\/li\u003e\n\u003cli\u003eCompatible with 16v vehicle systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32309715927100,"sku":"30-0312","price":211.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0312_50.jpg?v=1593562190"},{"product_id":"aem-gps-speedometer-gauge-x-series","title":"AEM GPS Speedometer Gauge X-Series","description":"\u003cp\u003eAEM’s X-Series GPS Speedometer (PN 30-0313) display ground speed, course and altitude via an included 10Hz GPS receiver. Users can integrate the X-Series GPS Speedo into an Infinity ECU to add track mapping, and an included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need for a vehicle speed sensor.\u003c\/p\u003e\n\u003cp\u003eA 10Hz GPS receiver receives speed, heading and altitude data from multiple satellites at 10 samples\/second providing excellent accuracy and reliability. The GPS receiver includes a magnet and adhesive bottom for exterior mounting on the vehicle.\u003cbr\u003eThe X-Series GPS Speedometer Gauge has a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.\u003c\/p\u003e\n\u003cp\u003eX-SERIES DIGITAL GPS SPEEDOMETER FEATURES:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplays ground speed, heading and altitude!\u003c\/li\u003e\n\u003cli\u003eIntegrate with the Infinity ECU via AEMnet CAN bus to add track mapping!\u003c\/li\u003e\n\u003cli\u003eTransmit vehicle speed to an existing speedometer without needing a VSS sensor\u003c\/li\u003e\n\u003cli\u003eUser selectable units of measurement (US or Metric)\u003c\/li\u003e\n\u003cli\u003e2-1\/16th (52mm) gauge diameter for easy mounting in gauge pods\u003c\/li\u003e\n\u003cli\u003eSlim 0.825” overall gauge depth and 0.200” cup depth – mount them virtually anywhere!\u003c\/li\u003e\n\u003cli\u003e24 green outer LEDs for quick reference to engine parameter\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel with white faceplate accessory kit available (sold separately, PN 30-0313-ACC)\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor delivers ideal display brightness\u003c\/li\u003e\n\u003cli\u003ePositive locking connector provides secure connection\u003c\/li\u003e\n\u003cli\u003eCompatible with 16v vehicle systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32311119249468,"sku":"30-0313","price":204.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0313_50.jpg?v=1610399066"},{"product_id":"aem-tru-boostx-controller-gauge-x-series","title":"AEM Tru-BoostX Controller Gauge X-Series","description":"\u003cp\u003eThe Tru-BoostX Boost Controller Gauge delivers all of the features you loved about the original only now with AEMnet for data logging and a big, fat internal MAP sensor that can handle boost pressures up to 80 PSI of boost.\u003c\/p\u003e\n\u003cp\u003eThe Tru-BoostX Boost Controller gauge delivers digital accuracy but with the simplicity of a manual boost controller. All programming is done using the faceplate buttons and no laptop is required. AEM’s specially designed Boost Control Solenoid and all necessary hardware is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProgram Two Boost Levels + Scramble Boost Setting\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChange Wastegate Open Pressure\u003c\/strong\u003e—Ideal for reducing boost spikes and improving spool up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisplay Boost Levels in PSIg (PSI), BAR or kPa (PAS)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e–See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet Alarms and Display Peak Boost\u003c\/strong\u003e—Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the “B” button to see peak boost level and clear the value using the menu.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverboost Protection Built In\u003c\/strong\u003e—Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntegrated Error Protection\u003c\/strong\u003e—Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDatalog using AEMnet CAN bus\u003c\/strong\u003e—Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA boost display gauge and boost controller in one!\u003c\/li\u003e\n\u003cli\u003eEasy to program – no laptop required\u003c\/li\u003e\n\u003cli\u003eBoost control solenoid and all necessary hardware included\u003c\/li\u003e\n\u003cli\u003eOn-board 80PSIg MAP sensor—no upgrade kit needed for high boost vehicles\u003c\/li\u003e\n\u003cli\u003eTwo boost level settings and scramble boost setting\u003c\/li\u003e\n\u003cli\u003eWastegate open pressure setting for controlling boost spikes and faster spool\u003c\/li\u003e\n\u003cli\u003eDisplay boost levels in PSI, BAR or kPa\u003c\/li\u003e\n\u003cli\u003eOverboost protection and programmable alarms, ground output for optional LED warning light\u003c\/li\u003e\n\u003cli\u003ePeak boost level recall\u003c\/li\u003e\n\u003cli\u003eX-Series design for the best visibility (87% larger center LED and 33% larger face design)\u003c\/li\u003e\n\u003cli\u003eX-Series dimensions make it easier to install (0.825” overall depth, 0.20” cup depth)\u003c\/li\u003e\n\u003cli\u003eAEMnet CAN bus enabled for data logging (13 channels of data over 2-wire connection)\u003c\/li\u003e\n\u003cli\u003eStandard 52mm (2-1\/16”) cup\u003c\/li\u003e\n\u003cli\u003e24 programmable green outer LEDs\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor for ideal brightness day or night\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors\u003c\/li\u003e\n\u003cli\u003eOptional silver bezel with white faceplate accessory kit (30-0352-ACC)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":32311121084476,"sku":"30-0352","price":389.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/30-0352_50.jpg?v=1593609984"},{"product_id":"adu5-advanced-display-unit-rev-2-ip65","title":"ADU5 Advanced Display Unit","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe are proud to announce the new ECUMASTER Racing Dash family of products. We designed the ADU5 and ADU7 in response to market demand for a cost-effective dash display with logging capabilities. Our specific goal was to create a fully customizable, feature-rich, quality solution for competitive drivers. We consulted professional drivers and race engineers and designed the ADU to exceed their requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAbove all, the ADU is designed to display all critical information in an easy to read manner, along with a comprehensive strategy for displaying alarms.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur Advanced Display Units are available in 5” and 7” versions. Both versions feature high resolution, high visibility anti-glare screens, guaranteeing perfect visibility in any lighting conditions. The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.). Pages may be changed manually or automatically (based on defined conditions). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified in real time using user-friendly Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independent of the actual page displayed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ADU is also equipped with 15 ultra-bright RGB LEDs which can be used as an advanced gear-depended shift light and can be modified by user-defined logic (for alarms, low fuel level, etc.). Using IR beacons or a GPS system, the dash turns into a powerful lap timer with a predictive timing function. By selecting the Qualification page, you enable a “Qualification Mode” which uses advanced predictive lap timing based on an automatically updated “best” reference lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eUser configurable timers can be adjusted for additional functionality (pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake discs or tyre temperatures (up to 16 points per tyre).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eCommunication with other devices in the car is provided via two built-in, independent CAN bus communication ports. CAN templates are provided for most popular ECUs, and are fully configurable, allowing you to connect our hardware to virtually any engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo ensure that all features work seamlessly, our device is based on a 32-bit automotive controller paired with a state of the art graphics processor. This combination provides the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor further data analysis, data channels can be logged to a USB Flash drive with a frequency of up to 500Hz.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll of these “Must Have” features and more are housed in a rugged, specially CNC machined, black anodized enclosure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFree, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eGeneral Specifications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOperating voltage: 6-22V, immunity to transients according to ISO 7637, with reverse polarity protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCPU: 32 bits, automotive, 90MIPS Temperature range: -30°C to 80°C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnclosure: Anodized aluminum, CNC machined\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIP61 Connector: Automotive 36-way AMP connector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e5” display: Antiglare TFT, 800x480, active area 108x64.8mm, luminance 600 cd\/m2\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlarms: 15 x ultrabright RGB LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCommunication: CAN: 2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial: RS232 (Rx,Tx)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB: Yes, for data logging (dash programming must be done via CAN, using CAN to USB adapter, Peak Pcan, or Kvaser cable)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAnalogue inputs: 8 analogue inputs, 10 bits, 500Hz, software selectable pullups\/pulldowns\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDigital inputs: 8 inputs with user defined sensitivity Outputs: General purpose 2 x protected 3A low side outputs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003eOther:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eAccelerometer: 3 axis gyro and 3 axis acceleration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLight sensor: Built in for auto brightness\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTemperature sensor: Built in to trace device internal temperature\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReal time clock: Built in with battery backup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLap timer with memory, predictive timing, triggered by a beacon or GPS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCustomization: 48 available pages, user defined content, custom graphics allowed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFunctions: Math channels logical functions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOverlays: Yes, user defined\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCAN stream: User defined, up to 48 input messages, predefined streams for popular ECUs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLogging: Memory\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB Flash Memory Rate: Up to 500Hz per channel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReal time clock: Yes \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll popular ECUs are supported. If your ECU is not supported,\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eplease send an email to tech@ecumaster.com.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e**SUPPORT ARTICLES BELOW**\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp align=\"JUSTIFY\" lang=\"en-GB\"\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/adu_manual_en.pdf\" target=\"_blank\"\u003eADU USER MANUAL\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/wp\/wp-content\/uploads\/2016\/11\/Pinout-ADU.pdf\" target=\"_blank\"\u003eADU PINOUT\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/ADUSetup_87_0_1.exe\" target=\"_blank\"\u003eADU SOFTWARE PACKAGE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/wp\/wp-content\/uploads\/2023\/01\/ADU5v2.pdf\" target=\"_blank\"\u003eADU5 REV.2 DRAWING\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/ADU_CAD_DATA_REV2.zip\" target=\"_blank\"\u003eADU REV.2 CAD DATA\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ECUMaster","offers":[{"title":"No","offer_id":45618303664427,"sku":"ECUADU5","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Add USB to CAN","offer_id":45618303697195,"sku":"ECUADU5-USBCAN","price":1584.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/ADU5.jpg?v=1687895053"},{"product_id":"adu7-advanced-display-unit-rev-2-ip65","title":"ADU7 Advanced Display Unit","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe are proud to announce the new ECUMASTER Racing Dash family of products. We designed the ADU5 and ADU7 in response to market demand for a cost-effective dash display with logging capabilities. Our specific goal was to create a fully customizable, feature-rich, quality solution for competitive drivers. We consulted professional drivers and race engineers and designed the ADU to exceed their requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAbove all, the ADU is designed to display all critical information in an easy to read manner, along with a comprehensive strategy for displaying alarms.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur Advanced Display Units are available in 5” and 7” versions. Both versions feature high resolution, high visibility anti-glare screens, guaranteeing perfect visibility in any lighting conditions. The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.). Pages may be changed manually or automatically (based on defined conditions). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified in real time using user-friendly Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independent of the actual page displayed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ADU is also equipped with 15 ultra-bright RGB LEDs which can be used as an advanced gear-depended shift light and can be modified by user-defined logic (for alarms, low fuel level, etc.). Using IR beacons or a GPS system, the dash turns into a powerful lap timer with a predictive timing function. By selecting the Qualification page, you enable a “Qualification Mode” which uses advanced predictive lap timing based on an automatically updated “best” reference lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eUser configurable timers can be adjusted for additional functionality (pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake discs or tyre temperatures (up to 16 points per tyre).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eCommunication with other devices in the car is provided via two built-in, independent CAN bus communication ports. CAN templates are provided for most popular ECUs, and are fully configurable, allowing you to connect our hardware to virtually any engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo ensure that all features work seamlessly, our device is based on a 32-bit automotive controller paired with a state of the art graphics processor. This combination provides the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor further data analysis, data channels can be logged to a USB Flash drive with a frequency of up to 500Hz.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll of these “Must Have” features and more are housed in a rugged, specially CNC machined, black anodized enclosure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFree, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eGeneral Specifications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOperating voltage: 6-22V, immunity to transients according to ISO 7637, with reverse polarity protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCPU: 32 bits, automotive, 90MIPS Temperature range: -30°C to 80°C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnclosure: Anodized aluminum, CNC machined\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIP61 Connector: Automotive 36-way AMP connector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e7” display: Antiglare TFT, 800x480, active area 154.08x85.92mm, luminance 500 cd\/m2\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlarms: 15 x ultrabright RGB LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCommunication: CAN: 2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial: RS232 (Rx,Tx)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB: Yes, for data logging (dash programming must be done via CAN, using CAN to USB adapter, Peak Pcan, or Kvaser cable)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAnalogue inputs: 8 analogue inputs, 10 bits, 500Hz, software selectable pullups\/pulldowns\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDigital inputs: 8 inputs with user defined sensitivity Outputs: General purpose 2 x protected 3A low side outputs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003eOther:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eAccelerometer: 3 axis gyro and 3 axis acceleration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLight sensor: Built in for auto brightness\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTemperature sensor: Built in to trace device internal temperature\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReal time clock: Built in with battery backup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLap timer with memory, predictive timing, triggered by a beacon or GPS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCustomization: 48 available pages, user defined content, custom graphics allowed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFunctions: Math channels logical functions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOverlays: Yes, user defined\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCAN stream: User defined, up to 48 input messages, predefined streams for popular ECUs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLogging: Memory\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB Flash Memory Rate: Up to 500Hz per channel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReal time clock: Yes \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAll popular ECUs are supported. If your ECU is not supported,\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eplease send an email to tech@ecumaster.com.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003e**SUPPORT ARTICLES BELOW**\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/adu_manual_en.pdf\" title=\"ADU USER MANUAL\"\u003eADU USER MANUAL\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/wp\/wp-content\/uploads\/2016\/11\/Pinout-ADU.pdf\" title=\"ADU PINOUT\"\u003eADU PINOUT\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/ADUSetup_87_0_1.exe\" title=\"ADU SOFTWARE PACKAGE\"\u003eADU SOFTWARE PACKAGE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/wp\/wp-content\/uploads\/2023\/01\/ADU7v2.pdf\" title=\"ADU7 REV.2 DRAWING\"\u003eADU7 REV.2 DRAWING\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/ADU_CAD_DATA_REV2.zip\" title=\"ADU REV.2 CAD DATA\"\u003eADU REV.2 CAD DATA\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: #0e4bfa;\" data-mce-style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/adu_manual_en.pdf\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e","brand":"ECUMaster","offers":[{"title":"No","offer_id":45618456756523,"sku":"ECUADU7","price":1899.0,"currency_code":"USD","in_stock":true},{"title":"Add USB to CAN","offer_id":45618456789291,"sku":"ECUADU7-USBCAN","price":1854.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/ADU7.jpg?v=1687897450"},{"product_id":"adu7-autosport-advanced-display-unit","title":"ADU7 AutoSport Advanced Display Unit","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThe ADU7 AutoSport Display is identical in spec to the regular ADU7, but features a 37 position AutoSport connector instead of the AMP connector on the original ADU7.\u003c\/span\u003e AutoSport connectors are used in the highest tiers of motorsports and are the most compact and robust available. This connector uses a size 22 gold plated solid contact. Please ensure you have proper tooling available.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.). Pages may be changed manually or automatically (based on defined conditions). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified in real time using user-friendly Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independent of the actual page displayed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe ADU is also equipped with 15 ultra-bright RGB LEDs which can be used as an advanced gear-depended shift light and can be modified by user-defined logic (for alarms, low fuel level, etc.). Using IR beacons or a GPS system, the dash turns into a powerful lap timer with a predictive timing function. By selecting the Qualification page, you enable a “Qualification Mode” which uses advanced predictive lap timing based on an automatically updated “best” reference lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eUser configurable timers can be adjusted for additional functionality (pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake discs or tyre temperatures (up to 16 points per tyre).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eCommunication with other devices in the car is provided via two built-in, independent CAN bus communication ports. CAN templates are provided for most popular ECUs, and are fully configurable, allowing you to connect our hardware to virtually any engine management system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eTo ensure that all features work seamlessly, our device is based on a 32-bit automotive controller paired with a state of the art graphics processor. This combination provides the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor further data analysis, data channels can be logged to a USB Flash drive with a frequency of up to 500Hz.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll of these “Must Have” features and more are housed in a rugged, specially CNC machined, black anodized enclosure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFree, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eGeneral Specifications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOperating voltage: 6-22V, immunity to transients according to ISO 7637, with reverse polarity protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCPU: 32 bits, automotive, 90MIPS Temperature range: -30°C to 80°C\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnclosure: Anodized aluminum, CNC machined\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIP61 Connector: Automotive 36-way AMP connector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e7” display: Antiglare TFT, 800x480, active area 154.08x85.92mm, luminance 500 cd\/m2\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlarms: 15 x ultrabright RGB LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCommunication: CAN: 2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial: RS232 (Rx,Tx)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB: Yes, for data logging (dash programming must be done via CAN, using CAN to USB adapter, Peak Pcan, or Kvaser cable)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAnalogue inputs: 8 analogue inputs, 10 bits, 500Hz, software selectable pullups\/pulldowns\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDigital inputs: 8 inputs with user defined sensitivity Outputs: General purpose 2 x protected 3A low side outputs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003eOther:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eAccelerometer: 3 axis gyro and 3 axis acceleration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLight sensor: Built in for auto brightness\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTemperature sensor: Built in to trace device internal temperature\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReal time clock: Built in with battery backup\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLap timer with memory, predictive timing, triggered by a beacon or GPS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCustomization: 48 available pages, user defined content, custom graphics allowed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFunctions: Math channels logical functions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOverlays: Yes, user defined\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCAN stream: User defined, up to 48 input messages, predefined streams for popular ECUs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLogging: Memory\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUSB Flash Memory Rate: Up to 500Hz per channel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReal time clock: Yes \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAll popular ECUs are supported. If your ECU is not supported, \u003cspan data-mce-fragment=\"1\"\u003eplease send an email to tech@ecumaster.com.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e**SUPPORT ARTICLES BELOW**\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/adu_manual_en.pdf\" target=\"_blank\"\u003eADU USER MANUAL\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/ADUSetup_87_0_1.exe\" target=\"_blank\"\u003eADU SOFTWARE PACKAGE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/wp\/wp-content\/uploads\/2016\/11\/Pinout-ADU-AS.pdf\" target=\"_blank\"\u003eADU7 AUTOSPORT PINOUT\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/wp\/wp-content\/uploads\/2023\/01\/Dashboard7AS.pdf\" target=\"_blank\"\u003eADU7 AUTOSPORT DRAWING\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0e4bfa;\"\u003e\u003ca style=\"color: #0e4bfa;\" href=\"https:\/\/www.ecumaster.com\/files\/ADU\/ADU_CAD_data.zip\" target=\"_blank\"\u003eADU CAD DATA\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ECUMaster","offers":[{"title":"No","offer_id":45618493653291,"sku":"ECUADU7AS","price":2249.0,"currency_code":"USD","in_stock":true},{"title":"Add USB to CAN","offer_id":45618493686059,"sku":"ECUADU7AS-USBCAN","price":2154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/ADU7AS1.jpg?v=1687898142"},{"product_id":"aem-x-series-wideband-uego-afr-sensor-controller-gauge-accessory-kit","title":"AEM Wideband UEGO AFR Gauge Accessory Kit X-Series","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe AEM Wideband X-Series UEGO AFR Gauge has a black bezel and black dual-faced faceplate for air\/fuel and Lambda included standard, while this optional silver bezel with white dual-faced air\/fuel and Lambda faceplate is available for users that wish to change the look of their gauge. \u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver bezel\/white gauge option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46196109967659,"sku":"30-0300-ACC","price":14.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-0300-ACCfull.png?v=1691507216"},{"product_id":"aem-obdii-gauge-accessory-kit-x-series","title":"AEM OBDII Gauge Accessory Kit X-Series","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe AEM X-Series \u003cspan data-mce-fragment=\"1\"\u003eOBDII Gauge\u003c\/span\u003e has a black bezel and black faceplate included standard, while this optional silver bezel with white faceplate is available for users that wish to change the look of their gauge.\u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver bezel\/white gauge option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46196564394283,"sku":"30-0311-ACC","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-0311-ACCfull.png?v=1691507230"},{"product_id":"aem-volt-gauge-accessory-kit-x-series","title":"AEM Volt Gauge Accessory Kit X-Series","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe AEM X-Series Volt G\u003cspan data-mce-fragment=\"1\"\u003eauge\u003c\/span\u003e has a black bezel and black faceplate included standard, while this optional silver bezel with white faceplate is available for users that wish to change the look of their gauge.\u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver bezel\/white gauge option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46196632486187,"sku":"30-0303-ACC","price":16.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-0303-ACCFull.png?v=1691507723"},{"product_id":"aem-gps-speedometer-gauge-accessory-kit-x-series","title":"AEM GPS Speedometer Gauge Accessory Kit X-Series","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe AEM X-Series GPS Speedometer G\u003cspan data-mce-fragment=\"1\"\u003eauge\u003c\/span\u003e has a black bezel and black faceplate included standard, while this optional silver bezel with white faceplate is available for users that wish to change the look of their gauge.\u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver bezel\/white gauge option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46196666204459,"sku":"30-0313-ACC","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-0313-ACCfull.png?v=1691507951"},{"product_id":"aem-60psi-4-bar-boost-pressure-gauge-accessory-kit-x-series","title":"AEM 60PSI\/4 BAR Boost Pressure Gauge Accessory Kit X-Series","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe AEM X-Series 60PSI\/4 BAR Boost Pressure G\u003cspan data-mce-fragment=\"1\"\u003eauge\u003c\/span\u003e has a black bezel and black faceplate included standard, while this optional silver bezel with white faceplate is available for users that wish to change the look of their gauge.\u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver bezel\/white gauge option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46196713455915,"sku":"30-0308-ACC","price":13.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-0308-ACCfull.png?v=1691508818"},{"product_id":"aem-temperature-gauge-accessory-kit-x-series","title":"AEM Temperature Gauge Accessory Kit X-Series","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe AEM X-Series Temperature G\u003cspan data-mce-fragment=\"1\"\u003eauge\u003c\/span\u003e has a black bezel and black faceplate included standard, while this optional silver bezel with white faceplate is available for users that wish to change the look of their gauge.\u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver bezel\/white gauge option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46196785807659,"sku":"30-0302-ACC","price":22.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-0302-ACCfull.png?v=1691509425"},{"product_id":"aem-oil-pressure-gauge-accessory-kit-x-series","title":"AEM Oil Pressure Gauge Accessory Kit X-Series","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe AEM X-Series Oil Pressure Gauge has a black bezel and black faceplate included standard, while this optional silver bezel with white faceplate is available for users that wish to change the look of their gauge.\u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver bezel\/white gauge option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46196931461419,"sku":"30-0307-ACC","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-0307-ACCfull.png?v=1691511087"},{"product_id":"aem-fluid-pressure-gauge-accessory-kit-x-series","title":"AEM Fluid Pressure Gauge Accessory Kit X-Series","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe AEM X-Series Fluid Pressure Gauge has a black bezel and black faceplate included standard, while this optional silver bezel with white faceplate is available for users that wish to change the look of their gauge.\u003c\/div\u003e\n\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver bezel\/white gauge option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":46196947026219,"sku":"30-0301-ACC","price":16.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/30-0301-ACC.png?v=1691511319"},{"product_id":"hybrid-racing-liquid-filled-fuel-pressure-gauge","title":"Hybrid Racing Liquid Filled Fuel Pressure Gauge V2 (Universal)","description":"\n\u003cp\u003eOur precision-engineered Hybrid Racing fuel pressure gauge has a new look and improvements. It provides accurate fuel pressure readings that are critical for EFI fuel systems. They resist the most severe vibrations, offer a 0-100 psi reading, and are housed in an all-steel case with a satin black finish, a new Gray face, and a Hybrid Racing Green needle. This is a universal part that works great with any aftermarket fuel system. Keep tabs on your fuel pressure in a stylish \u0026amp; reliable way. High-quality construction, made in the USA. \u003c\/p\u003e\n ","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":47711815729451,"sku":"HYB-FPG-00-03","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/products\/HYB-FPG-01-03-001-SQ.jpg?v=1704818963"},{"product_id":"aeromotive-0-15-psi-fuel-pressure-gauge","title":"Aeromotive 0-15 PSI Fuel Pressure Gauge","description":"Fuel Pressure Gauge. 1.5? Diameter. 1\/8? NPT Male Connection. 0-15 PSI Pressure Range. Liquid Filled For Durability. Integral Equalizer Valve Ensures Accuracy Regardless of Operating Temperature. Liquid Filled Gauges offer a better looking, more durable option for gauges that will live in a harsh environment like under the hood, attached to a high-performance engine.?The problem with regular liquid-filled gauges is they can be temperature sensitive, with fuel pressure readings prone to rising and falling with the temperature of the oil in the gauge case, regardless of actual fuel pressure.?As under-hood and therefore gauge temperatures can swing across a large range, this can be especially frustrating. Aeromotive Liquid Filled Gauges feature a custom equalizer valve that allows gauge case to be quickly equalized to the atmosphere, instantly correcting the gauge reading regardless of operating temperature.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d20325e47dad715f7d61bfbfba56fc04.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/30b94e41547d3e92e4d9af02851bb7dd.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":51412124172587,"sku":"AER15632","price":58.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/4361011759fa7a2b3b1c2bc735c6fcd0.jpg?v=1761188238"},{"product_id":"aeromotive-0-100-psi-fuel-pressure-gauge","title":"Aeromotive 0-100 PSI Fuel Pressure Gauge","description":"Fuel Pressure Gauge. 1.5? Diameter. 1\/8? NPT Male Connection. 0-100 PSI Pressure Range. Liquid Filled For Durability. Integral Equalizer Valve Ensures Accuracy Regardless of Operating Temperature. Liquid Filled Gauges offer a better looking, more durable option for gauges that will live in a harsh environment, like under the hood, attached to a high performance engine.?The problem with regular liquid filled gauges is they can be temperature sensitive, with fuel pressure readings prone to rising and falling with the temperature of the oil in the gauge case, regardless of actual fuel pressure.?As under-hood and therefore gauge temperatures can swing across a large range, this can be especially frustrating. Aeromotive Liquid Filled Gauges feature a custom equalizer valve that allows gauge case to be quickly equalized to atmosphere, instantly correcting the gauge reading regardless of operating temperature.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/d20325e47dad715f7d61bfbfba56fc04.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/30b94e41547d3e92e4d9af02851bb7dd.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":51412124238123,"sku":"AER15633","price":58.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/0b158c465d7aab9caedcc772e3adad8c.jpg?v=1761188239"},{"product_id":"autometer-gauge-kit-5-pc-3-3-8in-2-1-16in-elec-speedometer-cruiser-ad","title":"AutoMeter Gauge Kit 5 Pc. 3-3\/8in. \u0026 2-1\/16in. Elec. Speedometer Cruiser Ad","description":"AutoMeter has brought together the most popular gauges into a simple kit. The kit includes a speedometer, water temperature, oil pressure, fuel level, and voltmeter. All senders included where applicable.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ba4078adba9a6edc0f57fef7d1c47a43.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ce65d73e7aac23a675ce5c7b88cf7508.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412332577067,"sku":"ATM1100","price":902.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/b4fa951ee4829202c25ee120caae3745.jpg?v=1761193693"},{"product_id":"autometer-gauge-kit-5-pc-3-3-8in-2-1-16in-elec-speedometer-cruiser","title":"AutoMeter Gauge Kit 5 Pc. 3-3\/8in. \u0026 2-1\/16in. Elec. Speedometer Cruiser","description":"AutoMeter has brought together the most popular gauges into a simple kit. The kit includes a speedometer, water temperature, oil pressure, fuel level, and voltmeter. All senders included where applicable.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ba4078adba9a6edc0f57fef7d1c47a43.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ce65d73e7aac23a675ce5c7b88cf7508.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412332642603,"sku":"ATM1101","price":902.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/e3aff4de8a576b53f4ae01b2a8f8f4f9.jpg?v=1761193694"},{"product_id":"autometer-gauge-fuel-level-2-1-16in-0-ohme-to-90-ohmf-elec-cruiser-ad","title":"AutoMeter Gauge Fuel Level 2-1\/16in. 0 Ohm(e) to 90 Ohm(f) Elec Cruiser Ad","description":"One Of The Most Necessary Gauges In A Dashboard, Autometer Makes It Easy By Offering 5 Different Resistance Range Configuration To Match Your Existing Fuel Sending Unit. Available In 0-90 Ohm (Gm Mid 60S To Mid 90S), 0-30 Ohm (Early Gm), 73-10 Ohm (Pre 90S Ford And Chrysler), 16-158 Ohm (Later Model Fords) And 240-33 Ohm (Aftermarket Senders Such As The Autometer 3262). Our Patented Air Core Meter Movement Receives Extra Dampening To Help Combat The Effects Fuel Slosh In Non-Baffled Tanks.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/f62e4c40db7edd1625aab890f2e85817.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412332708139,"sku":"ATM1104","price":116.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/449dcb83d72cbce8a181c1f17108e764.jpg?v=1761193694"},{"product_id":"autometer-gauge-fuel-level-2-1-16in-73-ohme-to-10-ohmf-elec-cruiser-ad","title":"AutoMeter Gauge Fuel Level 2-1\/16in. 73 Ohm(e) to 10 Ohm(f) Elec Cruiser Ad","description":"One Of The Most Necessary Gauges In A Dashboard, Autometer Makes It Easy By Offering 5 Different Resistance Range Configuration To Match Your Existing Fuel Sending Unit. Available In 0-90 Ohm (Gm Mid 60S To Mid 90S), 0-30 Ohm (Early Gm), 73-10 Ohm (Pre 90S Ford And Chrysler), 16-158 Ohm (Later Model Fords) And 240-33 Ohm (Aftermarket Senders Such As The Autometer 3262). Our Patented Air Core Meter Movement Receives Extra Dampening To Help Combat The Effects Fuel Slosh In Non-Baffled Tanks.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/f62e4c40db7edd1625aab890f2e85817.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412332773675,"sku":"ATM1105","price":116.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/238fbff79481a238257981a10b0f6da1.jpg?v=1761193695"},{"product_id":"autometer-gauge-fuel-level-2-1-16in-240-ohme-to-33-ohmf-elec-cruiser-ad","title":"AutoMeter Gauge Fuel Level 2-1\/16in. 240 Ohm(e) to 33 Ohm(f) Elec Cruiser Ad","description":"One Of The Most Necessary Gauges In A Dashboard, Autometer Makes It Easy By Offering 5 Different Resistance Range Configuration To Match Your Existing Fuel Sending Unit. Available In 0-90 Ohm (Gm Mid 60S To Mid 90S), 0-30 Ohm (Early Gm), 73-10 Ohm (Pre 90S Ford And Chrysler), 16-158 Ohm (Later Model Fords) And 240-33 Ohm (Aftermarket Senders Such As The Autometer 3262). Our Patented Air Core Meter Movement Receives Extra Dampening To Help Combat The Effects Fuel Slosh In Non-Baffled Tanks.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/f62e4c40db7edd1625aab890f2e85817.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412332839211,"sku":"ATM1107","price":116.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/0b7b0a3d6db6a062691cee26cdb44a28.jpg?v=1761193696"},{"product_id":"autometer-gauge-fuel-level-2-1-16in-programmable-cruiser-ad","title":"AutoMeter Gauge Fuel Level 2-1\/16in. Programmable Cruiser Ad","description":"Traditionally, Paring The Proper Fuel Level Level Gauge To The Application Could Be A More Difficult Task Than It Needed To Be. The Autometer Digital Stepper Motor Fuel Level Gauge Drastically Simplifies The Process With Its Easily Configurable Resistance Range. With 7 Common Configurations Stored In Memory From The Factory, The Vast Majority Of All Applications Are Covered. In The Instance Your Fuel Level Sender Is Not Included In These Preconfigured Ranges, An Innovative Custom Calibration Mode Allows Any Sending Unit That Operates Between 0 And 280 Ohms, Empty Or Full, To Be Easily Paired. Our Snapshot\" Programming Method Will Allow You To Capture The Empty And Full Readings And The Gauge Does The Rest. No Matter Your Application, There Simply Isnt An Easier Solution For Fuel Level Monitoring Available On The Market. A Direct Plug In Wiring Harness Is Included For Ease Of Installation.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/a8aea9dad99421b1a370349f007d280a.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412332904747,"sku":"ATM1108","price":196.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/ccab8f0592642dd989c44673ac507264.jpg?v=1761193696"},{"product_id":"autometer-gauge-fuel-level-2-1-16in-programmable-cruiser","title":"AutoMeter Gauge Fuel Level 2-1\/16in. Programmable Cruiser","description":"Traditionally, Paring The Proper Fuel Level Level Gauge To The Application Could Be A More Difficult Task Than It Needed To Be. The Autometer Digital Stepper Motor Fuel Level Gauge Drastically Simplifies The Process With Its Easily Configurable Resistance Range. With 7 Common Configurations Stored In Memory From The Factory, The Vast Majority Of All Applications Are Covered. In The Instance Your Fuel Level Sender Is Not Included In These Preconfigured Ranges, An Innovative Custom Calibration Mode Allows Any Sending Unit That Operates Between 0 And 280 Ohms, Empty Or Full, To Be Easily Paired. Our Snapshot\" Programming Method Will Allow You To Capture The Empty And Full Readings And The Gauge Does The Rest. No Matter Your Application, There Simply Isnt An Easier Solution For Fuel Level Monitoring Available On The Market. A Direct Plug In Wiring Harness Is Included For Ease Of Installation.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/a8aea9dad99421b1a370349f007d280a.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412332937515,"sku":"ATM1109","price":185.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/117f8a91d5272bc57bed1d4e42aca22a.jpg?v=1761193697"},{"product_id":"autometer-gauge-fuel-level-2-1-16in-0-ohme-to-90-ohmf-elec-cruiser","title":"AutoMeter Gauge Fuel Level 2-1\/16in. 0 Ohm(e) to 90 Ohm(f) Elec Cruiser","description":"One Of The Most Necessary Gauges In A Dashboard, Autometer Makes It Easy By Offering 5 Different Resistance Range Configuration To Match Your Existing Fuel Sending Unit. Available In 0-90 Ohm (Gm Mid 60S To Mid 90S), 0-30 Ohm (Early Gm), 73-10 Ohm (Pre 90S Ford And Chrysler), 16-158 Ohm (Later Model Fords) And 240-33 Ohm (Aftermarket Senders Such As The Autometer 3262). Our Patented Air Core Meter Movement Receives Extra Dampening To Help Combat The Effects Fuel Slosh In Non-Baffled Tanks.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/f62e4c40db7edd1625aab890f2e85817.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333003051,"sku":"ATM1113","price":116.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/fec71b7417f244b980dea9ca357107b3.jpg?v=1761193698"},{"product_id":"autometer-gauge-fuel-level-2-1-16in-73-ohme-to-10-ohmf-elec-cruiser","title":"AutoMeter Gauge Fuel Level 2-1\/16in. 73 Ohm(e) to 10 Ohm(f) Elec Cruiser","description":"One Of The Most Necessary Gauges In A Dashboard, Autometer Makes It Easy By Offering 5 Different Resistance Range Configuration To Match Your Existing Fuel Sending Unit. Available In 0-90 Ohm (Gm Mid 60S To Mid 90S), 0-30 Ohm (Early Gm), 73-10 Ohm (Pre 90S Ford And Chrysler), 16-158 Ohm (Later Model Fords) And 240-33 Ohm (Aftermarket Senders Such As The Autometer 3262). Our Patented Air Core Meter Movement Receives Extra Dampening To Help Combat The Effects Fuel Slosh In Non-Baffled Tanks.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/f62e4c40db7edd1625aab890f2e85817.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333068587,"sku":"ATM1115","price":116.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/efc7a7f329caeccdd2feb55871407209.jpg?v=1761193699"},{"product_id":"autometer-gauge-fuel-level-2-1-16in-240-ohme-to-33-ohmf-elec-cruiser","title":"AutoMeter Gauge Fuel Level 2-1\/16in. 240 Ohm(e) to 33 Ohm(f) Elec Cruiser","description":"One Of The Most Necessary Gauges In A Dashboard, Autometer Makes It Easy By Offering 5 Different Resistance Range Configuration To Match Your Existing Fuel Sending Unit. Available In 0-90 Ohm (Gm Mid 60S To Mid 90S), 0-30 Ohm (Early Gm), 73-10 Ohm (Pre 90S Ford And Chrysler), 16-158 Ohm (Later Model Fords) And 240-33 Ohm (Aftermarket Senders Such As The Autometer 3262). Our Patented Air Core Meter Movement Receives Extra Dampening To Help Combat The Effects Fuel Slosh In Non-Baffled Tanks.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/f62e4c40db7edd1625aab890f2e85817.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333134123,"sku":"ATM1117","price":116.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/9e2fa78fa53ef48ae8199dc19f5d9fcb.jpg?v=1761193699"},{"product_id":"autometer-gauge-oil-press-2-1-16in-100psi-elec-cruiser-ad","title":"AutoMeter Gauge Oil Press 2-1\/16in. 100PSI Elec Cruiser Ad","description":"Quite Possibly The Most Critical Vital To Monitor, Engine Oil Pressure Can Mean The Difference Between Making It Home And Needing To Replace The Engine. The Patented Air Core Meter Movement Provides The Durability And Accuracy That You Expect From The Autometer Name. Throughout 57 Years Of Building The Worlds Best Competition Instruments, This Meter Movement Has Been The Engine Powering The Machine That Sets The Benchmark. A Single Wire, 1\/8\" Npt Oil Pressure Sender Is Included.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ce65d73e7aac23a675ce5c7b88cf7508.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333232427,"sku":"ATM1126","price":144.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/75fca29a3ec66c1d4d707eb28848201b.jpg?v=1761193701"},{"product_id":"autometer-cruiser-electric-oil-pressure-2-1-16in-100-psi-gauge","title":"Autometer Cruiser Electric Oil Pressure 2 1\/16in 100 PSI Gauge","description":"Quite Possibly The Most Critical Vital To Monitor, Engine Oil Pressure Can Mean The Difference Between Making It Home And Needing To Replace The Engine. The Patented Air Core Meter Movement Provides The Durability And Accuracy That You Expect From The Autometer Name. Throughout 57 Years Of Building The Worlds Best Competition Instruments, This Meter Movement Has Been The Engine Powering The Machine That Sets The Benchmark. A Single Wire, 1\/8\" Npt Oil Pressure Sender Is Included.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ce65d73e7aac23a675ce5c7b88cf7508.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333297963,"sku":"ATM1128","price":144.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/270ca645819d168974c25a85c2542ef9.jpg?v=1761193701"},{"product_id":"autometer-gauge-water-temp-2-1-16in-250-deg-f-elec-cruiser-ad","title":"AutoMeter Gauge Water Temp 2-1\/16in. 250 Deg. F Elec Cruiser Ad","description":"A High Water Temp Can Be Detrimental To An Engine. Heat Is The Enemy Of Performance And Reliability. Keep Tabs On Your Temps With The Most Trusted Water Temperature Gauge On The Market. Autometers Advanced 1\/8\" Npt Temperature Transducer Is Included For A Simple Installation On Any Application.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ce65d73e7aac23a675ce5c7b88cf7508.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333363499,"sku":"ATM1136","price":126.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/5683a59a8f4e954d80fcfbf44d8268e5.jpg?v=1761193701"},{"product_id":"autometer-gauge-water-temp-2-1-16in-250-deg-f-elec-cruiser","title":"AutoMeter Gauge Water Temp 2-1\/16in. 250 Deg. F Elec Cruiser","description":"A High Water Temp Can Be Detrimental To An Engine. Heat Is The Enemy Of Performance And Reliability. Keep Tabs On Your Temps With The Most Trusted Water Temperature Gauge On The Market. Autometers Advanced 1\/8\" Npt Temperature Transducer Is Included For A Simple Installation On Any Application.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/ce65d73e7aac23a675ce5c7b88cf7508.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333429035,"sku":"ATM1138","price":126.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/cddb412a631ce570a5cdde9ac178f915.jpg?v=1761193702"},{"product_id":"autometer-cruiser-ad-2-1-16in-full-sweep-electric-0-100-psi-oil-pressure-gauge","title":"Autometer Cruiser Ad 2-1\/16in Full Sweep Electric 0-100 PSI Oil Pressure Gauge","description":"The Life Blood Of Your Engine, A Lack Of Oil Pressure Is One Of The Most Catastrophic Scenarios That Can Happen. Knowing The Precise Pressure Is Critical To Both Its Longevity And Performance, As Well As Your Peace Of Mind. Autometers Digital Stepper Motor Oil Pressure Gauge Utilizes The Most Advanced Technology On The Market To Deliver Accuracy And Durability You Wont Find Anywhere Else. Our Advanced 1\/8\" Npt Solid State Pressure Transducer (Included) Provides The Best Possible Measurements With Unparalleled Resistance To Vibration And Heat. A Direct Plug In Wiring Harness Is Also Included For Ease Of Installation And Data Logging Is Available Thanks To A .5 - 4.5V Analog Output.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/763c1b3c21d26fc927bbb105e4299deb.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333494571,"sku":"ATM1152","price":323.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/a44da8302fb985526b64da09a977fdd1.jpg?v=1761193702"},{"product_id":"autometer-gauge-oil-press-2-1-16in-100psi-digital-stepper-motor-cruiser","title":"AutoMeter Gauge Oil Press 2-1\/16in. 100PSI Digital Stepper Motor Cruiser","description":"The Life Blood Of Your Engine, A Lack Of Oil Pressure Is One Of The Most Catastrophic Scenarios That Can Happen. Knowing The Precise Pressure Is Critical To Both Its Longevity And Performance, As Well As Your Peace Of Mind. Autometers Digital Stepper Motor Oil Pressure Gauge Utilizes The Most Advanced Technology On The Market To Deliver Accuracy And Durability You Wont Find Anywhere Else. Our Advanced 1\/8\" Npt Solid State Pressure Transducer (Included) Provides The Best Possible Measurements With Unparalleled Resistance To Vibration And Heat. A Direct Plug In Wiring Harness Is Also Included For Ease Of Installation And Data Logging Is Available Thanks To A .5 - 4.5V Analog Output.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/763c1b3c21d26fc927bbb105e4299deb.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333560107,"sku":"ATM1153","price":323.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/a72cc1e24bd390fa30bf12af58bd9e12.jpg?v=1761193703"},{"product_id":"autometer-cruiser-ad-2-1-16in-full-sweep-electric-100-260-deg-f-water-temperture-gauge","title":"Autometer Cruiser Ad 2-1\/16in Full Sweep Electric 100-260 Deg F Water Temperture Gauge","description":"Engines Dont Like High Water Temperatures, Heat Is The Enemy Of Performance And Reliability. Keep Tabs On Your Temps With The Most Accurate, Quickest Responding Water Temperature Gauge On The Market. Autometers Advanced 1\/8\" Npt Temperature Transducer Is Included As Well As A Direct Plug In Wiring Harness For Ease Of Installation.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/26ba265dba65155306a73a5aa85719b4.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333625643,"sku":"ATM1154","price":239.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/fb814ebe79e2adf66361003f00cd8f8b.jpg?v=1761193703"},{"product_id":"autometer-cruiser-2-1-16in-full-sweep-electric-100-260-deg-f-water-temperture-gauge","title":"Autometer Cruiser 2-1\/16in Full Sweep Electric 100-260 Deg F Water Temperture Gauge","description":"Engines Dont Like High Water Temperatures, Heat Is The Enemy Of Performance And Reliability. Keep Tabs On Your Temps With The Most Accurate, Quickest Responding Water Temperature Gauge On The Market. Autometers Advanced 1\/8\" Npt Temperature Transducer Is Included As Well As A Direct Plug In Wiring Harness For Ease Of Installation.\u003cbr\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/26ba265dba65155306a73a5aa85719b4.PDF\"\u003eInstallation Instructions\u003c\/a\u003e\u003cbr\u003e","brand":"AutoMeter","offers":[{"title":"Default Title","offer_id":51412333691179,"sku":"ATM1155","price":239.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/42ae2bfb1934ce120f6f8af3434a5e26.jpg?v=1761193704"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/collections\/30-0306_50_1.jpg?v=1593629309","url":"https:\/\/www.burton-racing.com\/collections\/gauges\/turn14_id-4400146.oembed","provider":"Burton-Racing","version":"1.0","type":"link"}