{"title":"Coilover Adjustable Spring Lowering Kit","description":null,"products":[{"product_id":"st-1-coil-over-suspension-f56-mini","title":"Dinan MINI Cooper S 14-24 \/ Cooper JCW 15-24 High Performance Adjustable Coil-Over Suspension","description":"\u003cp\u003eFor the MINI driver that demands versatility to uniquely perform in a variety of situations Dinan now offers an adjustable coil-over suspension that enables customizability to meet your desires!  Configuring for factory-like comfort, maximum performance, or a hybrid of both is easy to accomplish with the fully adjustable setup. No matter if used for your daily commute or showcasing your driving prowess at the racetrack, the traction that is awarded to the vehicle from the improved suspension will inspire newfound confidence when running at higher speeds.\u003c\/p\u003e\n\u003cp\u003eThe F55\/F56 MINI Coil-Over System has been designed to address the foundation for performance handling. The system consists of a set of linear rate performance-tuned springs and carefully matched adjustable front strut assemblies and rear shocks with integrated bumpstops for a predictable behavior you will be sure to appreciate. The system provides superior handling through increased grip and a substantial reduction of body roll while maintaining a nicely dampened ride. In addition, the lower ride height not only improves suspension geometry for improved performance but also gives the car a tasteful, aggressive stance. It's a formula Dinan has delivered to BMW enthusiasts successfully for decades and guarantees superior handling, performance, and comfort --- this time for MINI.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Due to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnly compatible with F55\/F56 vehicles without EDC\/DDC.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible w\/ non-DDC vehicles - F55\/F56\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eUp to 1.7\" of lowering in front and 1.1\" of lowering in back are possible depending on tire clearance but with diminished ride quality\u003c\/li\u003e\n\u003cli\u003eDinan recommends a 0.75\" (20mm) in front and back to maintain a civilized ride\u003c\/li\u003e\n\u003cli\u003eUp to 0.5\" of lift in front and 1.0\" in back over stock is also possible\u003c\/li\u003e\n\u003cli\u003eSpring rates are 93% stiffer in front (336 lbs\/in vs. 174 lbs\/in) and 58% stiffer in the rear (336 lbs\/in vs. 213 lbs\/in)\u003c\/li\u003e\n\u003cli\u003eUtilizes linear rate springs for increased predictability and compliancy\u003c\/li\u003e\n\u003cli\u003eThreaded collars allow easy and precise front \u0026amp; rear vehicle height adjustments\u003c\/li\u003e\n\u003cli\u003eIntegrated bumpstops to ensure minimal jarring when on less than ideal road surfaces\u003c\/li\u003e\n\u003cli\u003e32 levels of rebound damping adjustment\u003c\/li\u003e\n\u003cli\u003eSubstantial reduction in body roll\u003c\/li\u003e\n\u003cli\u003eImproved handling and grip\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant materials and finishes used throughout for maximum durability and longevity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":53417238692139,"sku":"D190-0001","price":979.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/1_7202c456-f729-478b-a2b6-141ef624b62b.png?v=1781076014"},{"product_id":"st-1-coil-over-suspension-f90","title":"Dinan BMW M5 18-23 High Performance Adjustable Coil-Over Suspension System","description":"\u003cp\u003eFor the driver that demands the best out of their vehicle.  The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment, the traction that is bestowed upon the vehicle from the improved suspension will inspire new found confidence when running at higher speeds. From the substantial reduction in body roll as well as reduction of dive under braking and squat under acceleration, Dinan guarantees you superior handling, performance, and comfort.\u003c\/p\u003e\n\u003cp\u003eDinan's design retains the superb factory electronic shocks but swaps the springs to a more aggressive formula and implements threaded collars to allow the user to change the ride height. While a stiffer spring is typically associated with diminished ride quality Dinan has also swapped the progressive rate rear springs in favor of a much more predictable linear rate spring design. This allows for a more compliant feel while still being able to enjoy the benefits of a stiffer setup such as the reduction in body roll. The end result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allows the car to be lowered an incredibly low two inches in the front and 2-1\/8 inches the rear. However, in order to retain the ride quality synonymous with Dinan suspension kits the recommended drop of 1\" in front and 1-18\" in the rear is advised. For suspension connoisseurs or those that are just simply very particular suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump-stops something no respectable race car is without.\u003c\/p\u003e\n\u003cp\u003eDue to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eF90\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eThreaded collars allow easy and precise front \u0026amp; rear vehicle height adjustments.\u003c\/li\u003e\n\u003cli\u003eUp to 2\" of lowering in front and 2-1\/8\" of lowering in back are possible depending on tire clearance but with diminished ride quality.  Dinan recommends a 1\" drop in front and a 1-1\/8\" drop in the rear to maintain a civilized ride.\u003c\/li\u003e\n\u003cli\u003eSpring rates are 20% stiffer in front and 15% stiffer in the rear. Stock rear springs are progressive whereas the Dinan springs are linear.\u003c\/li\u003e\n\u003cli\u003eHelper springs are utilized in the front and rear to maintain proper suspension operation under droop conditions as well as accommodate the extensive travel of the stock shocks.\u003c\/li\u003e\n\u003cli\u003eSubstantial reduction in body roll.\u003c\/li\u003e\n\u003cli\u003eIncluded suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort.\u003c\/li\u003e\n\u003cli\u003eDinan-spec progressive bump stops improve ride quality at lowered ride heights.\u003c\/li\u003e\n\u003cli\u003eComponents are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection.\u003c\/li\u003e\n\u003cli\u003eStock upper spring mounts are utilized for quiet operation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":53417238724907,"sku":"D190-0901","price":1743.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/1_53c2af1e-1bf5-4dae-aa0b-da253702a451.png?v=1781076144"},{"product_id":"st-1-coil-over-suspension-m5","title":"Dinan BMW M5 12-16 \/ M6 GC 14-19 High Performance Adjustable Coil-Over Suspension","description":"\u003cp\u003eFor the driver that demands the best out of their vehicle.  The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment the traction that is bestowed upon the vehicle from the improved suspension will inspire new found confidence when running at higher speeds. Combined with a substantial reduction in body roll as well as reducing dive under braking and squat under acceleration, Dinan will guarantee you superior handling, performance, and comfort.\u003c\/p\u003e\n\u003cp\u003eDinan's design keeps the factory Electronic Damper Control shocks in place and implements threaded collars to allow the user to change the ride height. The end result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allows the car to be lowered up to a 1.25\" (1.125\" on the M6). Suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump-stops something no respectable racecar is without. Components are machined from 6061-T6 aluminum and black anodized for appearance and corrosion protection.\u003c\/p\u003e\n\u003cp\u003eDue to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eF06\/F10\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eThreaded collars allow easy and precise front \u0026amp; rear vehicle height adjustments.\u003c\/li\u003e\n\u003cli\u003eUp to 1-1\/4\" of lowering is possible depending on tire clearance although 3\/4\" drop is  recommended to maintain ride quality. (M5)\u003c\/li\u003e\n\u003cli\u003eUp to 1-1\/8\" of lowering is possible depending on tire clearance although 5\/8\" drop is  recommended to maintain ride quality. (M6)\u003c\/li\u003e\n\u003cli\u003eSpring rates are 15% stiffer for both front and rear.\u003c\/li\u003e\n\u003cli\u003eSubstantial reduction in body roll.\u003c\/li\u003e\n\u003cli\u003eIncluded suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort.\u003c\/li\u003e\n\u003cli\u003eDinan-spec progressive bump stops improve ride quality at lowered ride heights.\u003c\/li\u003e\n\u003cli\u003eComponents are machined from 6061-T6 aluminum and black anodized for a sporty\u003c\/li\u003e\n\u003cli\u003eCompatible with BMW EDC shocks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":53417238757675,"sku":"D190-1011","price":1518.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/Untitleddesign_913b488a-64ca-4dee-977c-df6f9fc2ace8.png?v=1781076252"},{"product_id":"stage-1-suspension-e36-m3-199","title":"Dinan BMW M3 96-99 Stage 1 Suspension System","description":"\u003cp\u003eThe Stage 1 Suspension System has been designed to address the foundation for performance handling. The system consists of a set of performance-tuned springs and carefully matched Koni adjustable front strut assemblies and rear shocks. The system provides superior handling through increased grip and reduction of body roll while maintaining a nicely dampened ride. The modestly lower ride height gives the car a tastefully enhanced performance look as well as improving suspension geometry. The Koni struts feature externally adjustable rebound dampening via a knob located at the top of the strut. The shocks are also rebound adjustable requiring removal for adjustment.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNot compatible with the convertible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eE36\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eComplete base suspension kit inclusive of springs, struts and shocks.\u003c\/li\u003e\n\u003cli\u003eImproved handling and grip.\u003c\/li\u003e\n\u003cli\u003eReduction of body roll.\u003c\/li\u003e\n\u003cli\u003eMaintains comfortable ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":53417238790443,"sku":"D190-3211K","price":1743.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/Untitleddesign_a20178a7-0bc2-4bad-85cf-485cfbf2ff07.png?v=1781076940"},{"product_id":"st-1-coil-over-suspension-g8x-m3-m4","title":"Dinan BMW M3\/M4 21-26 High Performance Adjustable Coil-Over Suspension","description":"\u003cp\u003eFor the driver that demands the best out of their vehicle. The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment, the traction that is awarded to the vehicle from the improved suspension will inspire newfound confidence when running at higher speeds. From the substantial reduction in body roll as well as reduction of dive under braking and squat under acceleration, Dinan guarantees you superior handling, performance, and comfort.\u003c\/p\u003e\n\u003cp\u003eDinan's design retains the superb factory electronic shocks but swaps the springs to a more aggressive, performance enhancing formula and implements threaded collars that allow the user to change the ride height themselves. While shorter, stiffer springs are commonplace in aftermarket suspensions and are a key element in reduction of body roll it is not a one size fits all approach. In the case of the G8x M3\/M4 where the vehicle has a penchant for oversteer, stiffening the rear springs would exacerbate the problem of the rear losing traction before the front when the platform is pushed to the limit. Dinan instead has opted to soften the rear spring rate as well as switch from the factory progressive rate rear to a dual rate spring setup. The combination increases predictability and compliancy, and in turn, provides better rear grip\/road holding for a vehicle that needs both. The result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allow the car to be lowered up to 1-1\/8\" in the front and 2-1\/4\" inches the rear. However, to retain the ride quality synonymous with Dinan suspension kits the recommended drop of 3\/4\" (M4) or 7\/8\" (M3) in front and 3\/4\" in the rear is advised. For suspension connoisseurs, or those that are just simply very particular, suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump-stops --- something no respectable race car is without.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Due to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eG80\/G82\/G83\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eUp to 1\" of lowering in front and 2-1\/4\" of lowering in back are possible depending on tire clearance but with diminished ride quality\u003c\/li\u003e\n\u003cli\u003eDinan recommends a 3\/4\" (M4) to 7\/8\" (M3) drop in front and a 3\/4\" drop in the rear to maintain a civilized ride\u003c\/li\u003e\n\u003cli\u003eUp to 1\/2\" of lift in front and 1-1\/4\" in back over stock is also possible\u003c\/li\u003e\n\u003cli\u003eThreaded collars allow easy and precise front \u0026amp; rear vehicle height adjustments\u003c\/li\u003e\n\u003cli\u003eSpring rates are 15% stiffer in front and 10% softer in the rear for increased predictability and compliancy\u003c\/li\u003e\n\u003cli\u003eSubstantial reduction in body roll\u003c\/li\u003e\n\u003cli\u003eDinan-spec progressive bump stops improve ride quality at lowered ride heights\u003c\/li\u003e\n\u003cli\u003eIncluded suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort\u003c\/li\u003e\n\u003cli\u003eComponents are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection\u003c\/li\u003e\n\u003cli\u003eStock upper spring mounts are utilized as well as spring isolators for quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":53417238823211,"sku":"D190-8210","price":1267.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/1_f905b784-eeae-40ef-b090-0385eebdc03b.png?v=1781076399"},{"product_id":"st-1-coil-over-suspension-g87-m2","title":"Dinan BMW M2 23-26 High Performance Adjustable Coil-Over Suspension System","description":"\u003cp\u003eFor the driver that demands the best out of their vehicle. The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment, the traction that is awarded to the vehicle from the improved suspension will inspire newfound confidence when running at higher speeds. From the substantial reduction in body roll as well as reduction of dive under braking and squat under acceleration, Dinan guarantees you superior handling, performance, and comfort.\u003c\/p\u003e\n\u003cp\u003eDinan's design retains the superb factory electronic shocks but swaps the springs to a more aggressive, performance enhancing formula and implements threaded collars that allow the user to change the ride height themselves. While shorter, stiffer springs are commonplace in aftermarket suspensions and are a key element in reduction of body roll it is not a one size fits all approach. In the case of the G87 M2 where the vehicle has a penchant for oversteer, stiffening the rear springs would exacerbate the problem of the rear losing traction before the front when the platform is pushed to the limit. Dinan instead has opted to soften the rear spring rate as well as switch from the factory progressive rate rear to a dual rate spring setup. The combination increases predictability and compliancy, and in turn, provides better rear grip\/road holding for a vehicle that needs both. The result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allow the car to be lowered up to 1-1\/8\" in the front and over 2\" inches in the rear. However, to retain the ride quality synonymous with Dinan suspension kits the recommended drop of 3\/4\" in front and rear is advised. For suspension connoisseurs, or those that are just simply very particular, suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump-stops --- something no respectable race car is without.\u003c\/p\u003e\n\u003cp\u003eContrary to the market norm, the Dinan G87 M2 kit is not a direct carryover from the G8x M3\/M4 but a package independently developed to eke the most out of the M2 and the nuances that differ it from its larger siblings. The rear spring rates in particular on the smaller coupe are far more aggressive than those on the M3\/M4 from the factory.  This produces a stiffer, more uncomfortable ride than most are fond of beyond the racetrack. While utilizing the same rear springs as the Dinan M3\/M4 kit is possible the rates would be substantially softer resulting in reduced stability in cornering and an increase in body roll.  Instead, Dinan M2 rear springs are 13% softer than factory but still 10% stiffer than what the M3\/M4 kit would offer so a more compliant and comfortable ride can be achieved while also retaining its sporty character and abilities.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eDue to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eG87\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eUp to 1-1\/8\" of lowering in front and over 2\" of lowering in back are possible depending on tire clearance but with diminished ride quality\u003c\/li\u003e\n\u003cli\u003eDinan recommends a 3\/4\" drop in front and rear to maintain a civilized ride\u003c\/li\u003e\n\u003cli\u003eUp to 1\" of lift in front and over 2\" in back over stock are also possible\u003c\/li\u003e\n\u003cli\u003eThreaded collars allow easy and precise front \u0026amp; rear vehicle height adjustments\u003c\/li\u003e\n\u003cli\u003eSpring rates are 29% stiffer in front and 13% softer in the rear for increased predictability and compliancy\u003c\/li\u003e\n\u003cli\u003eSubstantial reduction in body roll\u003c\/li\u003e\n\u003cli\u003eDinan-spec progressive bump stops improve ride quality at lowered ride heights\u003c\/li\u003e\n\u003cli\u003eIncluded suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort\u003c\/li\u003e\n\u003cli\u003eComponents are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection\u003c\/li\u003e\n\u003cli\u003eStock upper spring mounts are utilized as well as spring isolators for quiet operation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":53417239511339,"sku":"D190-8220","price":1267.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/1_38110c86-11d7-4004-8132-6c387e8ed10d.png?v=1781076522"},{"product_id":"st-1-coil-over-suspension-f87","title":"Dinan BMW M2 16-18 \/ M2C 19-21 High Performance Adjustable Coil-Over Suspension","description":"\u003cp\u003eFor the driver that demands the best out of their vehicle.  The Dinan Adjustable Coil-Over Suspension was bred in the race lab but refined on the street for maximum versatility. No matter the environment, the traction that is bestowed upon the vehicle from the improved suspension will inspire new found confidence when running at higher speeds. Combined with a substantial reduction in body roll as well as reducing dive under braking and squat under acceleration. Dinan will guarantee you superior handling, performance, and comfort. Dinan's design implements threaded collars to allow the user to change the ride height. The end result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allows the car to be lowered up to one inch in the front and 1-1\/2 inches the rear. Suspension packers are included to fine-tune handling and comfort by changing the clearance of the progressive bump-stops, something no respectable race car is without. Components are machined from 6061-T6 aluminum and black anodized for appearance and corrosion protection.\u003c\/p\u003e\n\u003cp\u003eDue to the extensive lowering possible and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. Dinan is not responsible for any property damage or injury.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe kit is designed for vehicles not equipped with EDC \/ Adaptive M Suspension (2VF) which encompasses all M2 and M2C models. Adpative M Suspension was introduced for the M2CS model and while the kit would \"fit\" the M2CS it would also need additional accelerometer mounts and hardware to complete the kit. For those individuals who wish to apply this kit to the M2CS please contact the sales department at 1-800-341-5480 to order these additional components. They are: (1) D112-0066, (1) D112-0067, (4) D671-0192 and (2) D671-0196.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eF87\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eThreaded collars allow easy and precise front \u0026amp; rear vehicle height adjustments.\u003c\/li\u003e\n\u003cli\u003eUp to 1\" of lowering in front and 1 1\/2\" of lowering in back are possible depending on tire clearance although 3\/4\" drop in front and a 1\/2\" drop in the rear is recommended to maintain a civilized ride.\u003c\/li\u003e\n\u003cli\u003eSpring rates are nearly 18% stiffer in front and 5% stiffer in the rear.\u003c\/li\u003e\n\u003cli\u003eHelper Springs are used in the rear to maintain proper suspension operation under droop conditions.\u003c\/li\u003e\n\u003cli\u003eSubstantial reduction in body roll.\u003c\/li\u003e\n\u003cli\u003eIncluded suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort.\u003c\/li\u003e\n\u003cli\u003eDinan-spec progressive bump stops improve ride quality at lowered ride heights.\u003c\/li\u003e\n\u003cli\u003eComponents are machined from 6061-T6 aluminum and black anodized for a sporty appearance as well as corrosion protection.\u003c\/li\u003e\n\u003cli\u003eStock upper spring mounts are utilized for quiet operation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":53417239576875,"sku":"D190-8701","price":1743.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0064\/3645\/4465\/files\/1_c161854a-b82a-4648-ac41-9e36288fc440.png?v=1781076738"}],"url":"https:\/\/www.burton-racing.com\/collections\/coilover-adjustable-spring-lowering-kit.oembed","provider":"Burton-Racing","version":"1.0","type":"link"}